V - 1
Transport
5 Transport
5.1 Lighting
Make sure that the prescribed lights are
used and safety measures are followed for
road transportation in daylight and at night.
A lighting attachment set can be obtained
from your KRONE dealer. The implement is
already equipped with standard mountings.
5.2 Transport preparation
Insert the swath former completely.
To do this:
• Loosen the clamping lever (1)
• Insert the swath former completely
• Tighten the clamping lever (1).
• Turn the rotor until the anti-rotation lock (4) matches
the marked rotor tine arm (A). (4 front tine arms and 3
rear tine arms)
• Release the locking (2) by pulling on the cable (3).
• Fold up the protective frame and allow it to lock in
place. As the protective frame swivels up, the anti-
rotation lock (4) automatically swivels down.
To Next Page
Loading...
