Need help?Do you have a question about the Kronos Audio Kronos and is the answer not in the manual?
General| Brand | Kronos Audio |
|---|---|
| Model | Kronos |
| Category | Turntable |
| Language | English |
Place turntable on a solid rack, avoiding resonant materials like granite or glass.
Use adjustable feet and level to ensure base is perfectly flat horizontally and front-to-back.
Clean turntable parts with Kronos cleaner and insert 4 spacer rings to aid assembly.
Place second deck assembly on spacers and install silver bearing well using socket head screws.
Add 8ml of bearing oil and place the bearing ball on the shaft, ensuring it doesn't fall into the well.
Deposit balancer platter, then install 3 belts onto motor and pick-up pulleys, avoiding oil contact.
Place third deck, slide on leg caps, and tighten screws, ensuring caps are flush.
Install gold bearing well, add oil, and place bearing ball on the shaft.
Deposit top platter, install top pick-up pulley, grease shaft, and reinstall belts.
Install tonearm board, mount tonearm, and carefully remove white leg spacers.
Level turntable, connect pico cables to motor base and power supply, verify AC voltage.
Power on, calibrate speed by placing fingers on sensors, select 33.3 or 45 RPM.
Advice on turntable settling, speed system calibration, and performance.
Detailed specifications for dimensions, weight, power, motors, and components.
To Next Page