EasyManua.ls Logo

Krown ROYAL Series User Manual

Default Icon
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PLUMBING PRODUCTS
INSTALLATION GUIDE
Krowne Metal Corporation
100 Haul Rd. Wayne, NJ 07470 • Toll Free: (800) 631-0442 • Fax: (973) 872-1129
sales@krowne.com • www.krowne.com • www.facebook.com/KrowneMetal • www.twitter.com/KrowneMetal
GENERAL MOUNTING INSTRUCTIONS
1. Turn off water supply at main source.
2. Hand tighten all parts prior to tightening with a
wrench. Do not force the parts together.
3. Handle plated surfaces with care. Do not scratch
with tools.
Assemble Faucet to Couplings
Carefully orient, mount and hand tighten the
faucet to the couplings. Make sure that you use
the washers provided and place them between
the faucet body and the coupling. Make sure that
you maintain the alignment of the faucet body and use a
wrench to tighten the ange against the wall or deck.
Assemble Couplings to Sink Wall or Deck
The hose reel is equipped for universal mounting so that
it can be mounted on a structurally sound oor, wall or
ceiling; whichever provides
maximum performance. The hose guide arm must be
rotated to a position that allows the hose to feed through
the roller brackets with minimal bending. Replace the
fasteners. When rotating
guide arm, the U-bolt must be placed in the proper loca-
tion, otherwise the reel might “latch or lock out” during
use.
WALL MOUNT
WALL MOUNT with SINGLE VALVE
DECK MOUNT DECK MOUNT with SINGLE VALVE
DECK MOUNT
Rev. 09/2011
No. PLUMB-1.00
GENERAL ROYAL SERIES MOUNTING INSTRUCTIONS
Thank you for purchasing a quality Royal Series plumbing product from Krowne Metal Corporation. For installation instructions we will assume the hot and
cold water supplies end in 1/2” nipples. If you are installing a Wall Mount Faucet, we suggest that you use Krowne Metal’s Mounting Kit (#21-190L).
Printed in the USA
Question and Answer IconNeed help?

Do you have a question about the Krown ROYAL Series and is the answer not in the manual?

Krown ROYAL Series Specifications

General IconGeneral
MaterialBrass
FinishChrome
TypeFaucet
TemperatureUp to 140°F
WarrantyLifetime

Summary

General Royal Series Mounting Instructions

General Mounting Steps

Basic steps before faucet installation, including water shut-off and careful handling.

Wall Mount Installation

Instructions for installing Krowne Royal Series faucets on a wall.

Wall Mount with Single Valve

Specific steps for wall mount faucet installation with a single valve.

Deck Mount Installation

Instructions for installing Krowne Royal Series faucets on a deck.

Deck Mount with Single Valve

Specific steps for deck mount faucet installation with a single valve.

Royal Series Pre-Rinse Assembly Mounting Instructions

Pre-Rinse Assembly without Add-On Faucet

Steps for pre-rinse assembly completed at the factory.

Pre-Rinse Assembly with Add-On Faucet

How to install an optional faucet onto the pre-rinse assembly.

Wall Bracket Installation

Guidance on using the wall bracket to secure the pre-rinse riser pipe.

Gooseneck Spring Assembly

Instructions for attaching the gooseneck spring to the pre-rinse riser.

Final Assembly and Adjustments

Final tightening of connections and positioning of spray head hook.

Replacement Parts Overview

Product Warranty and Warnings

Krowne Royal Series Limited Warranty

Krowne Metal's limited warranty terms, conditions, and exclusions for Royal Series products.

California Proposition 65 Consumer Warning

Warning regarding chemicals in plumbing products as required by California law.