25
Owner’s manual
EN
GENERAL
Bluetooth: 3.0
Bluetooth range: up to 8 m
I/O: Jack 3,5 mm, optical input, power supply cord socket, (USB service port)
Supported formats: A2DP, AVRCP
Remote control distance: up to 6 m
Mounting: on stands, horizontally, on a wall
Power supply: 220-240 V, 50/60 Hz
SPECIFICATIONS
I cannot nd soundbar on my
Bluetooth device
Ensure the bluetooth function is
activated on your bluetooth device.
Remote control does not work
Use the remote control near the
unit.
Point the remote control at the
remote sensor on the unit.
Replace the battery in the remote
control with a new one.
Remove any obstacles between the
remote control and the unit.
If you are having a problem with your system, check this list for a possible solution
before calling for service. If you can not solve the problem from the hints give here,
dealer, for service.
TROUBLESHOOTING
No power
securely at both ends.
turned on.
Sometimes the unit auto turns
to standby
When the unit’s external input signal
level is too low, the unit will be turned
Please increase the volume level of
your external device
CLEANING
Before cleaning the unit, make sure it’s fully unplugged from the mains supply.
To clean the unit, wipe the case with a slightly moist, soft cloth.
To Next Page
Loading...
Need help?
General