Krups Blender User Manual

2
Use
1
2
3
4
5
Place the bowl (B)
on the motor unit
(A) and lock it by
turning it. (Fig. 1).
counter-clock wise.
Then remove the
plastic cover and fit
the blade (F) or
emulsifying disc (E)
onto the bowl (B).
Caution, the
blades are
extremely sharp.
Assemble the
emulsifying disc: the
emulsifying disc is
supplied in two
parts (axis + disc).
Before using this
accessory, clip the
axis onto the disc.
(Fig. 2).
After this
operation, the
accessory can no
longer be
disassembled.
Add the ingredients
(Fig. 3).
Do not go over the
"max." level shown
on the bowl (12 oz).
Fit the lid (D)
equipped with the
seal (C) and lock it by
turning it
counter-clock wise
(Fig. 4).
Be certain cover is
securely locked in
place before
operating the
appliance.
Press the lid (D) to
start up (Fig. 5).
Do not run the
appliance empty
Do not stick fingers
or other items into
the bowl while the
appliance is
plugged in.
Blades are sharp
and precaution
must be exercised.
The bowl, without
blade and lid, can
be used in the
microwave oven.
However only
non fat foods
should be used as
fatty foods can
easily overheat and
cause damage to
the plastic bowl.
KRUPS Constance USA 2/06/06 9:47 Page 2

Krups Blender Specifications

General

Brand	Krups
Model	Blender
Category	Blender
Language	English