EasyManuals Logo

Krups Grind & Brew KM8328 User Manual

Krups Grind & Brew KM8328
Go to English
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
ENGLISH
COFFEE PREPARATION WITH PRESET TIME
1. Fill water tank with desired quantity of water.
2. Open the lter holder.
3. Insert the paper lter.
4. Close the lter holder.
5. Set grinder parameters or Put desired quantity of coffee powder into the lter.
6. Place coffee carafe (J) on the keep warm plate.
7. Maintain the Preset time button (H5) pressed for 2 seconds. Preset time indicator (G7)
appears on the display. Time display(G1) will show preset timer and ash, means enter
into the preset state, will exit the preset time setting state if not pressing the button
within 5 seconds.
8. Set the time using the buttons of Time settings HR (H6) to select hour. Hour value is
displayed on screen (when maintaining Time settings HR (H6) pressed, hour values go
faster). It will exit the Time setting state (setting time has been saved) if the button is
not pressed within 3 seconds, the Preset time indicator (G7) disappears, and the Time
display (G1) shows the current time.
9. In the Preset time setting state (Preset time indicator (G7) ashes), short press Preset
time button (H5) to exit the Preset time setting state (the setting time has been saved
when adjusting the HR (H6) and MIN (H7) buttons), the preset time indicator (G7)
disappears, and the Time display (G1) shows Current Time.
10. In the standby state, short press Preset time button (H5), the preset time indicator (G7)
ashes, the Time display (G1) ashes to show the preset time for 3 seconds, the Time
display (G1) shows the current time and the preset time indicator (G7 ) light up, indicating
that the machine start the preset time.
11. Once the preset time is reached, the coffee preparation cycle starts automatically:
Preset time indicator (G7) disappears.
On/Off indicator (H2) ashes.
Operation indicator (G4) ashes.
Hot water ows through the ground coffee into the carafe.
12. When the coffee cycle is nished:
On/Off indicator (H2) changes from “ashes” to “lights up”
Operation indicator (G4) stops and disappears.
Preset time indicator (G7) disappears.
Machine enters 30 minutes keep warm.
On/Off indicator (H2) switches off after after keep warm.
STANDBY MODE
1. If no operation on the machine for 10 minutes, the appliance enters Standby mode for
Energy saving. All display switch off.
2. To wake up the machine : Press any button on the front panel
The Time (24h format) is displayed.
The machine enters “Ready to use” status for coffee preparation.
Cleaning and Care
NOTICES
Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to clean
the appliance. These can damage the surface.
1. Clean the lter basket and the carafe (J) after every use with mild detergent and warm
water.
2. If necessary, wipe down the coffee bean box (B) and the cover (A) with a damp cloth.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Krups Grind & Brew KM8328 and is the answer not in the manual?

Krups Grind & Brew KM8328 Specifications

General IconGeneral
BrandKrups
ModelGrind & Brew KM8328
CategoryCoffee Maker
LanguageEnglish

Related product manuals