To Next Page
A
Adam HarrisSep 12, 2025
How to fix a short-circuited NTC sensor in my Krups Nescafe Dolce Gusto Lumio KP130110?
- RRoger HendersonSep 12, 2025
If the NTC sensor of your Krups Coffee Maker is short-circuited, replace the NTC sensor.
How to fix a short-circuited NTC sensor in my Krups Nescafe Dolce Gusto Lumio KP130110?
If the NTC sensor of your Krups Coffee Maker is short-circuited, replace the NTC sensor.
How to clean a soiled Krups Coffee Maker capsule holder?
If the capsule holder of your Krups Coffee Maker is soiled and the locking tab and lid open sluggishly, clean the opened capsule holder in a dishwasher, or soak it in hot water first, then clean the capsule holder and hinges with a brush.
What to do if the Krups Nescafe Dolce Gusto Lumio KP130110 pump runs too long?
If the Krups Coffee Maker's pump runs for more than 10 minutes, it may be due to intensive use. To resolve this, allow the pump to cool down in eco mode and wait for 10 minutes.
How to fix cracks in the Krups Coffee Maker water tank?
If you observe cracks in the water tank of your Krups Coffee Maker, you should replace the water tank.
What to do if the Krups Coffee Maker heater overheats?
If the heater of the Krups Coffee Maker overheats, allow the thermoblock to cool down in eco mode for half an hour. If this occurs repeatedly, the thermoblock or building block PCB may be defective, and you may need to replace the building block.
Why won't the selection lever move on my Krups Nescafe Dolce Gusto Lumio KP130110?
If the selection lever of the Krups Coffee Maker cannot be moved to the left or right when the locking handle is closed, and it blocks or doesn't return to the middle position, replace the complete coffee machine.
Why is steam coming out of my Krups Coffee Maker?
If steam is coming out of your Krups Coffee Maker, replace the complete coffee machine.
How to fix a non-functional water tank valve on Krups Nescafe Dolce Gusto Lumio KP130110 Coffee Maker?
If the water tank valve of your Krups Coffee Maker is not functional, replace the water tank.
What to do if the NTC connection is broken on my Krups Coffee Maker?
If the NTC connection of your Krups Coffee Maker is broken, check the NTC wiring and connector. Replace the NTC sensor.
What to do if the needle tip of my Krups Coffee Maker is damaged?
If the needle tip of the injector on your Krups Coffee Maker is damaged, replace the capsule holder.
General| Brand | Krups |
|---|---|
| Model | Nescafe Dolce Gusto Lumio KP130110 |
| Category | Coffee Maker |
| Language | English |
Diagram illustrating the flow path of water through the machine's components.
Instructions for switching on and preparing the coffee machine.
Guide for initial machine rinsing and setup before first beverage.
Step-by-step instructions for making a beverage.
Procedure to identify machine errors using the bar display.
Comprehensive list of error codes and their descriptions.
Essential safety precautions and fundamental guidelines for disassembly and repair.
Detailed steps for disassembly and replacing major machine components.
Tests to verify water pressure and beverage flow rates.
Methods for detecting water leaks in different parts of the machine.
Procedures for verifying electrical safety compliance of the machine.
