Krups Nescafe Dolce Gusto Lumio KP130110 - Empty Fluid System for Shipping

Lumio service manual
26
OPERATING
Empty fluid system for shipping
For shipping a
machine, it is
important to empty the
fluid system.
Machine switches
on automatically.
Machine will not
work without
inserted capsule holder.
For packing see
 p. 95.
1. Remove and empty water tank and
drip tray.
2. Reassemble water tank and drip tray.
3. Open locking handle and remove
capsule holder.
4. Check that capsule holder is empty.
5. Re-insert capsule holder.
6. Place an empty container under-
neath outlet.
7. After machine is ready, set bar
display to level 7 with selector wheel.
8. Push selection lever to left position
“COLD”.
9. Machine stops automatically.
10. Set bar display to level 7 with
selector wheel.
11. Push selection lever to right position
“HOT”.
12. Machine stops automatically.
13. Remove and empty container. 17. Switch machine off.
18. Unplug power cord.
19. Clean machine and all accessories.
20. Send machine back with all provided
accessories.