Krups Nescafe Dolce Gusto Lumio KP130110 - Replace NTC Temperature Sensor; Assembly Tip

Lumio service manual
49
REPAIR
Replace NTC temperature sensor
1. Unplug NTC connector from building block PCB (part of building block 15).
2. Remove spring clip with pointed pliers and replace NTC temperature sensor (32).
Assembly tip
• Apply a small amount of standard heat conducting paste into socket of thermoblock
(part of building block 15) or on NTC sensor surface (32, see detail) before
assembly.
15
32
Use a small flathead
screwdriver to lever
the NTC connector out
of its socket.
32
15