Krups Nescafe Dolce Gusto Lumio KP130110 - Remove and Replace Bottom Parts; Remove Base Cover

Lumio service manual
39
REPAIR
Remove and replace bottom parts
Remove base cover
1. Insert blade of a small screwdriver into gap between base cover (10) and bottom
part (9) like shown.
2. Lift base cover a little bit with screwdriver until the wedge is released.
3. Then swivel screwdriver so that end of base cover moves sideways and both hooks
are released.
Use a repair stand
for easy disassem-
bly and parts replace-
ment.
10
9
Danger of
damage!
Hooks will break if
base cover (10) is lifted
too much.