Krups Nescafe Dolce Gusto Lumio KP130110 - Screw Tightening Torques

Lumio service manual
36
REPAIR
Screw tightening torques
The max. screw
tightening torque
indicated must not be
exceeded.
The torque val-
ues for plastic
parts are only applica-
ble for new parts. In
case existing parts are
reused, just screw
tight.
A dynamometric
screwdriver with
suitable bits is recom-
mended
Screw connection / screw type Torque Position
HMI module fixing screw (1x)
TX9 safety pin
dia. 2.9 x 13
5.0 ± 0.5 kgf·cm
49.0 ± 4.9 Ncm
4.3 ± 0.4 lbf-in
Locking handle fixing screws (2x)
Crosshead screw
dia. 2.6 x 8
3.0 ± 0.5 kgf·cm
29.4 ± 4.9 Ncm
2.6 ± 0.4 lbf-in
Housing left and right fixing
screws (3x)
TX9 safety pin
dia. 2.9 x 13
5.0 ± 0.5 kgf·cm
49.0 ± 4.9 Ncm
4.3 ± 0.4 lbf-in
Water tank connector fixing
screws (2x)
TX9 safety pin
dia. 2.9 x 13
5.0 ± 0.5 kgf·cm
49.0 ± 4.9 Ncm
4.3 ± 0.4 lbf-in