HELP AND TUTORIALS
DIFFERENT SETTINGS ARE AVAILABLE, DEPENDING ON THE DRINK:
.
One or two cups: to start the double recipe, select the drink and press .
. Coffee strength: to increase or decrease the strength of the coffee by changing the amount of ground coffee, select your drink
and choose between 1 and 3 beans, with 1 being the softest and 3 being the most full-bodied
.
. Cup volume: to increase or decrease the cup volume, scroll up or down the list of volumes and select the one you want.
For more information, see the drinks table in the instructions.
TIP
To select the coffee strength and cup volume, you can navigate up/down or press directly on your choice.
HOW DO I STOP A DRINK MIDPREPARATION?
Warning:You can stop the preparation of a drink at any time by pressing the
STOP
button. When a cycle is interrupted, it does
not stop immediately. The machine will be unavailable for a time, as indicated by a message on the screen.
MILKBASED DRINKS
TIPS
For frothed milk, use pasteurised UHT milk straight from the fridge (3–5°C). It is possible to use special milks (micro filtered,
raw, fermented, enriched) or plant-based milks (rice, oat or almond milk), but this can give less satisfactory results in terms
of quality and quantity of the froth.
HOW DO I START THE PREPARATION OF A MILKBASED DRINK?
Refer to “2 PREPARING A MILK-BASED RECIPE” earlier in the instructions, or see the “Starting a milky drink” tutorial stored in
your machine.
HELP AND TUTORIALS
HOT WATER
For teas and infusions, your machine has a “HotWater” option.
HOW DO I ADJUST THE WATER TEMPERATURE?
SETTINGS
Go to Settings, Adjust, Water temperature. You can set the
temperature between T1 and T3, where T1 is the coolest and T3
is the hottest temperature.
To Next Page
Loading...
Need help?
General
