English
12
Press the Auto-On button (n) to choose preset number 1 or number 2. You can check
the preset times by pressing PROG (r).
The machine will brew automatically at the designated time. The program will need to
be activated when needed again.
3- Auto-Off setting:
Press PROG (r) 3 times, the number of hours will blink and the 2 red lights (o) on the
control panel will blink.
Use the H button (p) to change between 1, 2 or 3 hours.
Press PROG when done.
This function controls how long the heating plate will continue before automatically
turning off. For best results we recommend brewing only as much coffee as you will
consume in 30-60 minutes. Taste is affected the longer the coffee is allowed to sit on
the heating plate.
4- Current time; Setting the clock :
Press PROG (r) 4 times. The current time setting will blink.
Press the H and Min buttons to set the time including AM/PM settings. This will ensure
the Auto-On function activates at the proper time of day.
If you prefer a 24 hour clock or military time you can switch from AM/PM mode by
pressing the H and min buttons simultaneously. The AM/PM symbol will disappear
when the clock is running in 24 hour mode.
You can press and hold the buttons to move quickly through the hours or minutes.
Press PROG when done.
To Next Page
Loading...
Need help?
General
