7
3. BEFORE FIRST USE
Please familiarize yourself with all parts of your Krups espresso machine prior to use. Insert
the lter basket into the lter holder, t the lter holder into the lter rings, remove and
replace the boiler cap. Check the different positions of the switch. To remove any residue
from production which may rest in the appliance, run the machine through one or two cycles
with water only. Wash all loose parts in warm soapy water, rinse thoroughly and dry.
Read all instructions, cautions, notes and attentions before actually using the machine.
!
CAUTION – PRESSURE
!
Never open boiler cap or remove lter holder while your appliance is turned “on” or as
long as there is pressure in the boiler container.
!
Never move or remove the lter holder while the appliance is in operation and under
pressure.
!
Please follow the instructions listed below to see if the machine is still under pressure.
Follow these safety precautions while your machine is in use and ten to fteen minutes
after last use.
Turn the control knob (B) to the “OFF” position.
Carefully open the steam release knob by turning it counter clockwise. If steam comes out
of the nozzle, then the boiler chamber is still under pressure. Close steam knob and proceed
with instructions listed below.
2. DESCRIPTION:
A Water tank boiler cap:
Open the cover and ll tank with
cool water, then close the cover.
B Control knob:
Control the functions of brewing
espresso, stop brewing and steam.
C Display
C1 Hour screen
C2
Prog button
C3 Coffee button
C4 On/Off
C5 Min setting button
C6 Hour setting button
D Steam nozzle
E Drip tray
F Hinged lid
G Filter basket
H
Swing-out lter holder
I Non stick coated warming plate
J
Carafe lid
K Coffee carafe
L1 Filter for 2 to 4 cups
L2 Portalter
M1 Espresso carafe lid
M2 Espresso carafe
N Coffee spoon
ENGLISH
To Next Page
Loading...
Need help?
General
