Français
11
English
FILTER COFFEE MAKER PART
Before using for the first time
Operate the coffee maker for the first time with 1 litre of water, without ground coffee, by filling the
water compartment and pressing the on/off button on the filter coffee maker side.
IMPORTANT
The quality of the water you use is crucial to the taste of your coffee. You must
make sure that the water has just come out of the tap (so that it has not had
time to become stagnant in contact with the air), that it has no smell of chlorine
and that it is relatively cold.
We recommend that the water be filtered with a Krups Duo Filter cartridge reference XS
1000 available in stores.
Use filter paper n° 4.
Fill the water compartment using the graduated jug, according to the desired number of cups
(fig.24).
Observe the maximum amount of water in the tank, using the water level.
Lift the lid by pressing the OPEN button (fig.25).
Place a paper filter in the filter holder and fill it with ground coffee using the measuring spoon, with
one spoon per cup of coffee (fig. 26).
Press the "on/off" button on the filter coffee maker part, the light comes on, the cycle starts.
The filter coffee maker is fitted with an anti-drip appliance which enables you to serve the coffee
before it has completely finished running through. If you serve yourself a coffee while the cycle is still
running, place the jug back in position quickly to prevent any spillage.
The jug and lid are compatible for reheating in microwave ovens.
Never leave your empty jug in the microwave oven.
To remove the coffee grinds, remove the filter holder from the appliance.
Unplug the appliance.
Do not clean when hot.
Clean with a damp cloth or sponge.
Never place it in water or under a running tap.
Descaling
Number of cycles between 2 descaling operations
Without duo filter With duo filter
Soft water 60 120
Hard water 40 80
DESCALING THE FILTER COFFEE MAKER
CLEANING
MAKING COFFEE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
