EasyManua.ls Logo

Krups XP2070 - User Manual

Krups XP2070
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
21
Description
Espresso:
A : Espresso lid with filter storage
B : Removable espresso tank
C : Cup warming plate
D : Brewing head
E : Steam nozzle
F : Cappuccino accessory for frothing milk
G : Drip tray grid
H : Drip tray
I : Filter holder
J : 1 & 2 cup loose espresso filters
K : Espresso filter for ESE pods (Easy Serving
Espresso)
L : "CLARIS" water filter -Aqua
Filter System F088 (accessory not provided)
M : Loose coffee measuring spoon
N : Start / Stop switch for espresso with
temperature control light (blue)
O : 1 and 2 cup espresso selection button
and access to the programmed quantity
per cup:
/ and
P : Steam hot water and selection button:
and
S : Blue lit central display
S1 : Scroll button for setting the time and
choosing the automatic mode for the
coffee maker:
and
S2 : OK button:
Coffee:
a : Coffee maker lid access to the tank and
filter holder
b : Coffee maker tank
c : Filter-holder housing
d : Filter holder with carrying handle
e : Calibrated water level indicator for the
coffee maker tank
f : Hinged lid of filter coffee jug
g : Filter coffee jug
h : Coffee warming plate
i : "Duo Filter XS 1000" water filter
(accessory not provided)
j : Start/stop filter coffee switch with blue
operating indicator
k : Selection button for programmable mode
and end-of-cycle sound signal:
and
l : Selection button for strong or normal
coffee strength:
or
Safety recommendations
Please read these instructions carefully
before first using your espresso.The
appliance must only be connected to the
mains via an earthed plug. Check that the
voltage shown on the appliances indicator
plate corresponds to that of your electricity
supply. It complies with the requirements of
the EEC Directive (89/336/EEC) and (72/23/
EEC).
Never put your espresso on a hot surface
(electric warming plate, for example) or close
to a flame. Place on a flat, stable heat-
resistant surface.
Never remove the filter holder containing
the coffee grounds while water is being
passed through, since the appliance is under
pressure at this time.
Never use the appliance if the drip tray and
the drip tray grid are not in position.
Disconnect the electricity if there is any
problem while the coffee is brewing or prior
to cleaning your appliance.
Never unplug the appliance by pulling on
the cord and never lay the cord across a
sharp edge or the corner of an item of
furniture.
Do not allow the cord or your hands to
come into contact with the hot parts of the
appliance (cup warming plate, filter holder,
steam nozzle, cappuccino accessory).
Never immerse the appliance in water.
Keep away from children and do not allow
the cord to hang down.
Follow the instructions given for descaling.
Never start the machine if it is damaged or
not operating correctly or if the cord is in
poor condition.
If the cord or any other specific part
becomes defective, these can only be
replaced by a Krups approved service centre.
You must never, under any circumstances,
open the appliance yourself, in order to
avoid any danger.
English
XP2070 anglais.P65 7/11/05, 12:3221

Questions and Answers

  • A
    angela30Aug 11, 2025
    What to do if water does not run through my Krups XP2070?
    • C
      Claudia FloresAug 11, 2025
      If water isn't running through your Krups Coffee Maker, there might be a few reasons. First, ensure the water tank is filled and correctly mounted by pressing firmly down on it. Also, the filter could be blocked, or the coffee grounds might be too fine or tamped down too hard. Try cleaning the filter and using a coarser coffee. If the brewing head grid is encrusted, soak it in descaling solution.
  • J
    Jamie MeyerAug 18, 2025
    What to do if coffee leaks around the filter holder on my Krups XP2070 Coffee Maker?
    • A
      Angela ChambersAug 18, 2025
      If you're experiencing coffee leaks around the filter holder of your Krups Coffee Maker, make sure the filter holder is correctly mounted and sufficiently tightened. Also, check for coffee grounds on the edge of the filter and clean them off. A dirty brewing head gasket could also be the culprit; try cleaning it with a damp cloth. If the brewing head gasket is defective, you should contact an approved Krups service center.
  • J
    Jason DunnAug 27, 2025
    How to make my Krups Coffee Maker espresso hotter?
    • M
      Mary McclureAug 27, 2025
      To increase the temperature of your espresso from the Krups Coffee Maker, preheat the accessories, including the cups, filter, and filter holder.
  • C
    Calvin RobersonSep 2, 2025
    Why is my Krups Coffee Maker pump so noisy?
    • D
      Darrell HensonSep 2, 2025
      A noisy pump in your Krups Coffee Maker can stem from a few issues. Check if the water tank is empty and fill it if needed. Ensure the water tank is correctly mounted by pressing firmly down on it. Also, using old or very dry coffee grounds can prevent the pump from producing pressure. Try using fresh coffee.

Krups XP2070 Specifications

General IconGeneral
TypeEspresso Machine
Power1450 W
Pump Pressure15 bar
Dimensions24 x 34 x 29 cm
Weight4.5 kg
Product TypeCoffee Maker
ModelXP2070
BrandKrups
ColorBlack / Silver
Filter TypePermanent Filter
Auto Shut-OffYes
Keep Warm FunctionYes
MaterialStainless Steel

Related product manuals