31
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The appliance doesn't
work
The pump has been
deactivated due to a lack
of water.
Fill the tank with water
and re-initiate the pump
(see paragraph: USING
FOR THE FIRST TIME).
Avoid emptying the tank
completely.
The removable water tank
has been tted incorrectly.
Position the water tank
correctly.
The steam wand does not
foam the milk.
The steam wand is
blocked or has an excess
of limescale.
Descale the steam wand
according to the paragraph
on Descaling or unblock it
using a needle.
The milk is too hot. Use fresh milk.
The shape of the container
is not suitable.
Use a small jug.
Follow the milk foaming
instructions (paragraph on
STEAM FUNCTION).
If it is not possible to identify the cause of a malfunction, please contact an approved
service centre. Never disassemble the appliance. (if the appliance has been
disassembled, the guarantee may no longer be valid).
We participate in the protection of the environment!
Your appliance contains a number of materials that can be reused or recycled.
Take it to a collection point or an approved service centre so that it can be dealt
with appropriately.
ELECTRIC OR ELECTRONIC PRODUCT AT END
OF LIFE
To Next Page
Loading...
