4 5
Pairing the speaker to your device
1. Press the MFB (1) to turn the speaker on. It will enter pairing
mode, with the LED indicator (5) ashing blue quickly
2. Turn your iOS, Android, or Windows device’s Bluetooth
ON and search for new devices
3. Select ‘KS Boogie’. If asked for a passcode, enter ‘0000’,
and the device will pair. The LED indicator (5) will be solid
blue once device paired
Instructions for use
Charging the speaker
Give the speaker a full charge before its rst use.
1. Connect the USB charging cable supplied, to the Micro
USB charging port (4) and plug into power
2. The LED indicator (5) will be red whilst charging which
will take up to 2 hours
3. Once fully charged the LED indicator (5) will turn o
Note: Allow up to 3 hours for the rst charge.
To Next Page