poli
Magnetic contact wls
Installation guide
INTRODUCTION
poli is a wireless magnetic contact with 2 auxiliary inputs, integral part of the 868 MHz Bi-Directional
System of Ksenia.
poli integrates inside 2 programmable inputs which can be used to connect external wired magnetic
contacts rather than wired curtain detectors, glass brake detectors and/or wired roller blind detectors,
rendering it, as a matter of fact, as a small wireless expansion module (up to 3 zones).
Thanks to its Bi-Directional Communication, the input configuration (type, number of impulses, balance) are
programmable directly from the basis software.
As all the other KSENIA wls devices, the poli magnetic contact implements DPMS (Dynamic Power
Management System), the possibility to program the supervision time from minimum of 1 minute to a
maximum of 240 minutes (default set-up: 5 minutes), the battery status control (with signal warning
transmission when its substitution is recommended), and integrates 2 tampers (on the opening and on its
removal).
TECHNICAL DATA
• Power: 1 Lithium Battery Type CR123A included for a maximum duration time up to 4 years
• Consumption: 50 mA max
• Operative Frequency: 868 MHz Band
• Inputs: Nr.2 programmable balanced
• Range in open air: up to 400 m
• Operative Temperature Range: +5 °C to +40 °C
• Contact Dimensions: 30 x 90 x 30 mm (HxWxD)
• Magnet Dimensions: 15 x 34 x 14 mm (HxWxD)
To Next Page
Need help?
General