What to do if there is no change in suction and exhaust pressure after starting KStar FocusAir FS012 Air Conditioner?
If there's no change in suction and exhaust pressure after starting, it could be due to compressor reversal or internal air blistering. If the compressor is reversed, exchange any two L lines of the compressor; if there is internal air blistering, replace the compressor.
What to do if KStar FocusAir FS012 Air Conditioner displays heating, but electric heater does not generate heat?
If the display shows heating, but the electric heater isn't generating heat, it could be because the electric heater wiring terminal is loose. Check whether the terminal is inserted tightly.
What to do if KStar Air Conditioner contactor is closed but there is no heating effect?
If the contactor is closed but there is no heating effect, it could be that the heater is burned out. Cut off the power and check the resistance of the heater with an ohmmeter.
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Type | Split System |
| Features | Sleep Mode, Timer |
| Operating Temperature (Cooling) | 18°C to 43°C |
To Next Page