Need help?Do you have a question about the KT&C KNR-p16Px16 and is the answer not in the manual?
Details on managing hard disk drives, including capacity and property settings.
Features for recording video, capturing images, and playback functionalities.
Procedure for safely powering the NVR on and off, including rebooting.
Step-by-step guide to using the setup wizard for initial NVR configuration.
Instructions for connecting and adding IP cameras to the NVR system.
Process for detecting and adding IP cameras that are online on the network.
Modifying settings for connected IP cameras and configuring custom protocols.
Configuring cameras connected via the NVR's Power over Ethernet (PoE) interfaces.
How to use various functions and controls within the live view mode.
Customizing live view parameters like output, dwell time, and audio.
Setting up parameters for controlling PTZ (Pan, Tilt, Zoom) cameras.
Configuring camera presets, patrol paths, and movement patterns.
Steps to save specific camera positions as presets for quick recall.
How to recall saved camera presets in PTZ control or live view.
Defining patrol paths by setting key points, duration, and speed.
Activating predefined patrol paths for PTZ camera movement.
Recording and saving PTZ camera movement as patterns.
Setting image quality, stream type, resolution, and recording parameters.
Scheduling automatic recording or capture based on time periods.
Setting up motion detection for triggering recording or capture events.
Configuring recording or capture triggered by alarm inputs.
Methods to protect recorded files from being overwritten or deleted.
Methods for playing back recorded video files from the NVR.
Methods for backing up recorded video files to various storage devices.
Backing up files found through normal video search criteria.
Backing up event-related record files using event search criteria.
Configuring motion detection parameters and alarm response actions.
Configuring handling actions for external sensor alarms.
Setting up alarms and response actions for video signal loss.
Configuring alarms for video tampering and setting response actions.
Configuring alarms for Video Content Analysis (VCA) events from cameras.
Setting up handling actions for various system exceptions like HDD errors.
Defining how the NVR responds to alarms and exceptions.
Setting up basic network parameters like IP address, subnet mask, and gateway.
Configuring advanced network features such as PPPoE, DDNS, NTP, SNMP.
Procedure for initializing newly installed Hard Disk Drives before use.
Performing HDD detection using S.M.A.R.T. and Bad Sector Detection.
Setting up alarms for HDD errors or abnormal status.
Procedures for upgrading the NVR's system firmware.
Restoring the NVR to its factory default configuration.
Common issues and solutions for operating the NVR.
General| Brand | KT&C |
|---|---|
| Model | KNR-p16Px16 |
| Category | Network Hardware |
| Language | English |
To Next Page
