Need help?Do you have a question about the KT&C Omni960-4 and is the answer not in the manual?
General| Operating System | Embedded LINUX |
|---|---|
| Video Input | 4 channels |
| Audio Input | 4 channels |
| Audio Output | 1 channel |
| Video Compression | H.264 |
| Audio Compression | G.711 |
| RS485 | Yes |
| Power Supply | DC 12V |
| Video Output | HDMI, VGA |
| Recording Frame Rate | 30 fps |
| HDD | 1 SATA port, up to 4TB |
| Network Interface | 1 RJ-45 (10/100Mbps) |
| USB Interface | 2 USB 2.0 |
| Mobile Support | Yes |
Details the controls and indicators on the front panel of OMNI960-4/8/16 series DVR.
Explains the operation and button functions of the included IR remote control.
Describes how to connect and use a USB mouse for device control.
Details the soft keyboard icons and their functions for input.
Illustrates and describes the rear panel connectors for OMNI960-4/8/16 and OMNI960-32 models.
Provides steps for safely starting up and shutting down the DVR unit.
Guides through the initial setup wizard for system resolution, login, and date/time.
Introduces the Live View mode, showing real-time video from cameras and status icons.
Details how to perform various operations like single/multi-screen, auto-switch, and recording.
Explains how to customize Live View output, dwell time, audio, and event outputs.
Describes channel-zero encoding for remote viewing to conserve bandwidth.
Explains how to log out from the system, returning to live view mode.
Details the procedure for setting PTZ camera parameters before control.
Guides on setting and calling camera presets, patrols, and patterns for PTZ cameras.
Describes the icons and functions available in the PTZ control toolbar.
Explains how to define stream types, resolutions, and other recording parameters.
Details setting up schedules for automatic camera recording.
Guides on setting motion detection parameters and triggering recording.
Explains how to configure recording triggered by alarm inputs.
Describes how to manually start and stop recording for cameras.
Provides instructions for setting different recording plans for holidays.
Explains enabling redundant recording for enhanced data safety.
Details grouping HDDs and saving record files into specific HDD groups.
Describes how to protect record files from being overwritten.
Covers methods for playing back recorded video files by channel, time, event, or tag.
Explains how to play back video files recorded within a specified time duration.
Details playing back files searched by recording type and time.
Guides playback of files searched by event type like motion detection or alarm input.
Explains how to play back files using video tags for searching.
Describes playing back record files associated with system log entries.
Covers frame-by-frame playback and smart search functionality.
Details methods for backing up record files via quick export, search, or event search.
Explains management of backup devices like USB drives, HDDs, writers, and DVD-R/W.
Guides on configuring motion detection areas, sensitivity, and response actions.
Explains how to set handling methods for external sensor alarms.
Details how to detect video loss and configure alarm response actions.
Guides on detecting video tampering (lens covered) and setting response actions.
Covers handling various exceptions like HDD full, network disconnect, or IP conflict.
Explains configuring actions for alarms like full screen monitoring or email notifications.
Describes manual triggering or clearing of alarm outputs.
Details configuring basic network settings like IP address, gateway, and DNS.
Covers advanced network configurations like PPPoE, DDNS, NTP, SNMP, UPnP, and remote host.
Explains how to check real-time network traffic information.
Guides on testing network delay, packet loss, and checking network status/statistics.
Provides steps for initializing newly installed Hard Disk Drives (HDDs).
Explains how to add and manage NAS or IP SAN disks as network HDDs.
Details setting up HDD groups and assigning channels to specific HDD groups.
Guides on configuring allocated storage quota for each camera.
Explains how to check the status of installed HDDs for maintenance.
Describes how to view S.M.A.R.T. information for HDD reliability monitoring.
Guides on detecting and repairing bad sectors on HDDs.
Explains how to configure alarms for HDD errors or abnormal status.
Details configuring on-screen display settings like date/time and camera name.
Guides on setting up privacy mask zones to obscure specific areas of the video.
Explains how to adjust video parameters like brightness, contrast, and sharpness.
Describes how to view device, camera, record, alarm, network, and HDD information.
Guides on searching and exporting system log files.
Details importing and exporting device configuration files for backup or deployment.
Explains how to upgrade the device firmware via local backup or FTP server.
Provides instructions for restoring the device to its factory default settings.
Covers general configurations like BNC/VGA/HDMI output, mouse speed, and language.
Details configuring RS-232 serial port settings for device control or transparent channel.
Explains how to configure Daylight Saving Time (DST) settings.
Covers device name, number, output brightness, and timeout settings.
Guides on adding, deleting, editing, and managing user accounts and permissions.
Provides definitions for technical terms and acronyms used in the manual.
Addresses frequently asked questions regarding device operation and troubleshooting.
To Next Page
