KTC ATBX12 User Manual

Brake Service Tool Set (ATBX12) Instruction Manual
Thank you for purchasing KTC Brake Service Tool Set.
In order to use the tool safely and correctly, please be sure to read this handling instruction before use.
(Please keep this instruction manual with the product.)
This product is an assembly / disassembly tools for Drum Brake.
Please use this product only for its intended use.
Includes
C Washer Tool (ABX-31)
Pliers that are used for removing C-Washer which is fixed on Brake Shoe.
This pliers can be used for standard-sized automobile and small track (2 tons class)
Please use this product only for its intended use.
Do not use the tool if there is crack or deformation.
Usage Instructions
1. Pull and rotate the Claw. Wedge should be facing inward.
2. Align the caulking part of C-Washer with wedge of Claw.
Hold the grip, and expand the width of C-Washer.
3. Pull and rotate the Claw again. Planar part of Claw should be facing inward.
4. Attach the planer part of Claw with expanded C-Washer. Hold the grip, and force out the C-Washer.

KTC ATBX12 Specifications

General

Brand	KTC
Model	ATBX12
Category	Tools
Language	English

Summary

Brake Service Tool Set Overview

Included Tools List

Lists all the tools included in the KTC Brake Service Tool Set (ATBX12), detailing item numbers and quantities for each.

C Washer Tool (ABX-31) Usage

C Washer Tool Usage Instructions

Step-by-step guide for using the C Washer Tool to remove and install C-Washers on brake shoes, involving pulling, rotating, and aligning the claw.

Parking Shoe Lever Tool (ABX-32) Usage

Parking Shoe Lever Tool Usage Instructions

Instructions for using the Parking Shoe Lever Tool to remove and install brake cables by compressing springs and manipulating the shoe lever.

Shoe Hold Spring Tools (ABX-33, 34) Usage

Shoe Hold Spring Tools Usage Instructions

Guide on using Shoe Hold Spring Tools for installing/removing drum brake shoe hold springs, involving pressing and rotating the tool.

Tension Spring Tool (ABX-35) Usage

Tension Spring Tool (ABX-35) Usage Instructions

Instructions for installing drum brake tension springs using the Tension Spring Tool, involving hooking, extending, and guiding the spring.

Tension Spring Tool (AB-7) Usage

Tension Spring Tool (AB-7) Usage Instructions

Guide for removing drum brake tension springs with the Tension Spring Tool, detailing how to hook and pull the spring from the shoe.

Hex Key Wrench & Hex Hole Bolt 8mm (HLD100-06) Usage

Hex Key Wrench & Hex Hole Bolt Usage Instructions

Instructions for using the Hex Key Wrench and Hex Hole Bolt to remove the brake drum, emphasizing equal tightening of bolts.

Brake Shoe Adjustment Tools (ABX301, 302, 303) Usage

Brake Shoe Adjustment Tools Usage Instructions

Guide for adjusting brake clearance using Brake Shoe Adjustment Tools, involving insertion, turning the adjuster, and recap.