KTC H27S17 - Page 4

1.2 Packing List
Before installation, please check whether the following articles are complete in the packing box:
- LEDx1
- DP Signal Cablex!
- Power Cordx1
- Power Adapterx1
- Warranty Cardx1
- Screwdriverx1
- 0s6x1
- Base and mounting screws (M4x16 * 2)
I any of above product is missing, please contact with product distributor immediately.
Notice: Specific accessories in order to prevail in kind. Please keep packing materials for future movement.
2.Installation and Connection
2.1 Display Installation
Installation Guide
~The display should be installed near an AC power socket that can be easily pluggable.
It is recommended to use suitable wall mount brackets or a base for safety purpose.
~To prevent injury, the display should be placed on a smooth horizontal plane, or fixed on a firm wall.
-If you need to install it on a wall, it should be done by professional technicians. The improper
display installation may cause instability.
-Do not place the display where it may be suffered from mechanical vibration.
-Do not place the display where insects may enter.
-Do not place the display directly facing an air conditioner, or the internal panel may condense,
leading to faults.
-Do not place the display where there is a strong electromagnetic field, or it will be interfered with
and damaged by the electromagnetic waves.
Install on the wall Install on the base
/~30cm /~30cm
10cm 1 | |- 10em 100m |
N—i0cm
Ventilation is affected
——
L{ ventil
@ Please leave the spoce around the disploy with the size
atleast shown n the figur.
® 0o not cover the ventition hales o insert anything
into the shel.
@ Unless there ore proper ventiation conditons and
adequate ventilation space around the disploy, do not
ploce the disploy within a limited spoce, such os 0 book
cobinet or o buiftin closet.
wall
Ventilation is affected
wall
Tem