Why is my KTM 250 XC-F 2017 Motorcycle engine overheating?
If your KTM Motorcycle engine overheats, check the coolant level and inspect the cooling system for any leaks. Ensure there's sufficient airflow, and if standing still, switch off the engine. Clean the radiator fins if they are dirty. If there is foam formation in the cooling system, drain and refill the coolant. Finally, inspect the radiator hose; if it's bent, replace it.
Why does my KTM Motorcycle have high oil consumption?
If your KTM Motorcycle engine consumes a lot of oil, ensure the engine vent hose is correctly routed without any bends, replacing it if necessary. Check that the engine oil level isn't too high. If the oil is too thin, replace the engine oil and oil filter, and clean the oil screen.
What to do if my KTM Motorcycle engine turns but does not start?
If your KTM Motorcycle engine turns over but doesn't start, make sure the fuel line plug-in connection is properly connected. If the fuel screen in the fuel hose connection is clogged, replace it. Ensure the idle speed is correctly set. Clean and dry the spark plug, or replace it if needed. Adjust the plug gap to the recommended 0.8 mm (0.031 in). Check the wiring harness and electrical system for shorts or defects. If there is a defect in the fuel injection system, read out the fault memory using the KTM diagnostics tool.
How to fix KTM 250 XC-F 2017 when the engine does not turn?
If your KTM Motorcycle engine doesn't turn when you press the electric starter button, make sure you are following the correct start procedure. Check if the battery is discharged and recharge it if necessary. Also, check the charging voltage, open-circuit current, and the stator winding of the alternator. Replace the main fuse if it's blown. Check the starter relay and the starter motor for faults.
Why does my KTM 250 XC-F 2017 engine have too little power?
If your KTM Motorcycle engine has too little power, start by cleaning the air filter and air filter box. Replace the fuel filter if it's very dirty. Check the exhaust system for leaks or damage, and replace the glass fiber yarn filling in the main silencer if needed. Also, make sure to adjust the valve clearance if it's too little. If there is a defect in the fuel injection system, read out the fault memory using the KTM diagnostics tool.
What to do if the malfunction indicator lamp lights up on my KTM 250 XC-F 2017 Motorcycle?
If the malfunction indicator lamp on your KTM Motorcycle lights up or flashes, stop the motorcycle and identify the faulty part using the blink code. Also, inspect the cabling for any damage and check the electrical plug-in connections for corrosion and damage.
General| Displacement | 249.91 cc |
|---|---|
| Bore x Stroke | 78 x 52.3 mm |
| Transmission | 6-speed |
| Cooling | Liquid cooling |
| Ignition | Keihin EMS |
| Front Suspension | WP Xplor 48 |
| Rear Suspension | WP Xplor PDS |
| Starter | Electric Starter |
| Engine Type | Single Cylinder, 4-Stroke |
| Throttle Body | 42 mm |
| Front Brake | Disc brake, 260 mm |
| Rear Brake | 220 mm disc |
| Rear Suspension Type | Monoshock |
| Ground Clearance | 370 mm |
| Fuel System | Keihin EFI, 42mm Throttle Body |
| Seat Height | 960 mm (37.8 in) |
Defines the intended purpose and use of KTM sport motorcycles.
General advice for safe operation and highlights important safety instructions.
Explains risk categories and associated symbols (Danger, Warning, Caution, Note).
Warns against tampering with noise control systems and related acts.
Covers safe riding practices, including fitness, ventilation, and component temperatures.
Emphasizes the importance of wearing appropriate and well-maintained protective clothing.
Details rules for performing work, including special tools and part replacement.
Discusses responsible motorcycle use and proper disposal of fluids and components.
Offers advice for initial use, including safety, controls, and getting accustomed to the vehicle.
Provides guidelines for the engine running-in phase, including speed and performance limits.
Explains how low temperatures affect lithium-ion battery starting power and how to manage it.
Advises on vehicle preparation for challenging conditions like sand or mud.
Details specific preparations for riding on dry sand, including air filter and chain care.
Outlines preparations for riding on wet sand, focusing on air filter waterproofing.
Describes preparations for riding on wet and muddy terrain, including air filter and chain.
Advises on preparations for riding in high temperatures and low speeds, focusing on drive and cooling.
Details preparations for riding in low temperatures and snow, emphasizing air filter protection.
Lists essential checks before every trip to ensure safe vehicle operation.
Provides instructions and safety warnings for starting the engine.
Explains how to activate Launch Control for optimal race starts.
Describes the function and activation of traction control for improved grip.
Details the procedure for starting the motorcycle from a standstill.
Covers gear shifting, riding techniques, and advice for smooth operation.
Advises on proper brake application, warnings about brake system issues.
Details the refueling procedure, including safety warnings and fuel specifications.
Adjusting the basic chassis setting to match the rider's weight.
Details the WP AER 48 air suspension system used in the fork.
Introduces compression damping and its division into high-speed and low-speed ranges.
Guides on adjusting the low-speed compression damping of the shock absorber.
Provides instructions for adjusting the high-speed compression damping of the shock absorber.
Details how to adjust the rebound damping of the shock absorber.
Explains the procedure for measuring rear wheel sag without the rider's load.
Guides on checking the static sag of the rear shock absorber.
Explains how to check the riding sag of the rear shock absorber with rider load.
Details the process of adjusting the spring pretension on the shock absorber.
Provides instructions for adjusting the riding sag of the shock absorber.
Guides on adjusting the air pressure in the front fork legs.
Explains how to adjust the compression damping of the front fork.
Details how to adjust the rebound damping of the front fork.
Guides on checking for play in the steering head bearing.
Details the procedure for adjusting the steering head bearing play.
Guides on checking the free travel of the hand brake lever.
Details how to adjust the basic position of the hand brake lever.
Guides on checking the thickness of the front and rear brake discs.
Guides on checking the front brake fluid level.
Explains how to add front brake fluid.
Explains the procedure for changing the main fuse.
Provides details on identifying and replacing fuses, including spare fuse location.
Guides on checking and adjusting the play in the throttle cable.
Details the procedure for adjusting the throttle cable play.
Explains how to change the engine's throttle response using guide plates.
Describes how to activate different engine mapping modes via the combination switch.
Guides on setting the engine's idle speed to the specified value.
Guides on checking the engine oil level when the engine is cold or warm.
Details the procedure for changing the engine oil and oil filter, and cleaning the oil screen.
Provides instructions for adding engine oil to the correct level.
Lists possible causes and actions for when the engine does not turn over.
Lists possible causes and actions for when the engine turns but does not start.
Lists possible causes and actions for when the engine does not speed up or has low power.
To Next Page
