KTS-Electronic PULSE AR III - Introduction

KTS-Electronic – PULSE AR III
3
I. Introduction
Dear customer,
Congratulations to your purchase of PULSE AR III, a professionally-built metal
detector with discrimination and a depth location up to 6 m and most efficient to
search after precious metals (gold, silver, platinum).
To avoid possible operating errors please read this instruction manual carefully.
We wish you much success with your new PULSE AR III and will be at your disposal,
if any questions should arise.
II. Volume of delivery
 Electronic unit with built-in storage battery, leather bag and shoulder strap
 Mobile microprocessor-controlled quick-charger with car-recharger
(connection at cigarette lighter) and 110 Volt adapter
 Stereo headphones
 25cm searchcoil incl. telescope bar (depending on equipment version)
 45cm searchcoil (depending on equipment version)
 Cylindric coil (depending on equipment version)
 1x1m searchcoil, 8-fold fragmented incl. transport bag (depending on
equipment version)
 Carrying case
III. Installation
1. Assemble the telescope bar. For that purpose the central rod (aluminum tube
adjustable in length) has to be positioned into the aluminum tube of the arm-
rest.
2. Afterwards connect the telescope bar with the aluminum tube of the
searchcoil.
3. Wrap the searchcoil cable around the aluminum tube.
4. The electronic unit is protected by a bag; through the lower opening in the bag
the jack of the search coil must be plugged into the panel jack.