CAB OPERATION66
C Foot warming and head cooling
1. Set the mode switch to the position.
2. In the cooling or dehumidifying-heating mode, set the
temperature control dial at the center position area.
3. Open the front air outlet and the door air outlet direct it
to your feet.
4. You can feel your head cool and your feet warm.
C Defrosting or demisting
To defrost or demist the windshield, take the following
steps.
1. Set the mode switch to the position.
2. Open the front air outlet and direct it to the windshield.
3. Set the recirculation / fresh air selection lever to the
"FRESH AIR" position.
4. Set the blower switch and the temperature control dial
to the "3" and max "WARM" (end of clockwise)
positions, respectively.
(1) Temperature control dial (A) Center position area
(1) Mode switch
(2) Temperature control dial
(3) Blower switch
(A) "WARM"
To Next Page
Loading...
