Need help?Do you have a question about the Kubota B3350SU and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Drive | 4WD |
| Cylinders | 3 |
| Hydraulic System Type | Open Center |
| 3-Point Hitch Category | Category I |
| Tire Size (Front) | 7-16 |
| Tire Size (Rear) | 11.2-24 |
| Lift Capacity | 1, 653 lbs |
| Engine Power | 33 hp (24.6 kW) |
Explanation of the safety alert symbol and its significance.
Essential checks and preparations before starting tractor use.
Safety considerations and proper use of Cabin and Roll Over Protective Structures.
Safe practices for starting, general operation, and safety for children.
Proper procedures for parking the tractor safely.
Safe practices for using the Power Take-Off (PTO) system.
Safe procedures for connecting and using the 3-point hitch.
Important safety precautions for tractor maintenance and servicing.
Identification and function of controls on the instrument panel.
Explanation of various warning, indicator, and status lights on the instrument panel.
Identification and function of various foot and hand operated controls.
Information on the DPF system and its function.
Key considerations for fuel, engine oil, and operation related to the DPF.
Explanation of auto and inhibit modes for DPF regeneration.
Step-by-step guide for performing DPF regeneration.
Actions required for different PM warning levels in Auto Mode.
Procedures for safely shutting down the tractor engine.
Important checks and indicators to monitor while the tractor is in operation.
Explanation of the Easy Checker system and its warning lamps.
Steps for safely parking the tractor.
How and when to engage the differential lock for traction.
Safe driving practices when operating the tractor on public roads.
Crucial safety measures for operating on inclines and uneven ground.
Safety precautions and steps for using the PTO system.
How to select the correct PTO speed and position.
Operation of the PTO clutch lever for engaging/disengaging PTO.
Information and steps for attaching and adjusting the 3-point hitch.
Operation and adjustment of the 3-point hitch control system.
Controlling the working depth of 3-point hitch mounted implements.
Operating the hydraulic lift arm to control implement height.
Table outlining maintenance tasks based on operating hours.
Recommended lubricants, fuels, and coolant for the tractor.
Daily inspection procedures to ensure the tractor is in safe operating condition.
Procedure for checking the engine oil level.
Checking the condition of the seat belt and ROPS hardware.
Common engine problems, their causes, and corrective measures.
Troubleshooting common power train issues and error codes.
To Next Page
