Kubota B3350SU - PTO Clutch Lever

23OPERATING THE ENGINE
5. Place the hydraulic control lever in
"NEUTRAL" position.
[B3350SU only]
(1) Hydraulic control lever (A) "DOWN"
(B) "SLOW DOWN"
(N) "NEUTRAL"
(C) "SLOW UP"
(D) "UP"
6. Set the throttle lever to about 1/2 way.
(1) Hand throttle lever "INCREASE"
"DECREASE"
7. Insert the key into the key switch and
turn it "ON".
"OFF"
"ON"
"PREHEAT"
"START"