Kubota D1105-E4 - Page 38

26 SPECIFICATIONS
ENGLISH
A Specifications are subject to change without notice.
A This CO
2
measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine
representative of the engine type (engine family) and shall not imply or express any guarantee of the performance
of a particular engine.
Model D1305-E4 V1505-E4
Type Vertical, water-cooled, 4-cycle diesel engine
Number of cylinders 3 4
Bore and stroke mm (in.) 78 × 88 (3.07 × 3.46) 78 × 78.4 (3.07 × 3.09)
Total displacement cm (cu.in.) 1261 (76.95) 1498 (91.41)
Combustion chamber Spherical Type (E-TVCS)
SAE NET Intermittent kW / rpm
H.P. (SAEJ1349) (HP / rpm)
17.9/2600
(24/2600)
17.7/2300
(23.7/2300)
SAE NET Continuous kW / rpm
H.P. (SAEJ1349) (HP / rpm)
15.5/2600
(20.8/2600)
15.4/2300
(20.6/2300)
Maximum bare speed rpm 2820 2520
Minimum bare idling speed rpm 1100 1150
Order of firing 1-2-3 1-3-4-2
Direction of rotation Counter-clockwise (viewed from flywheel side)
Injection pump Bosch MD Type Mini Pump
Injection pressure 13.73 Mpa (140 kgf/cm , 1991 psi)
Injection timing (Before T.D.C.) 16° 14°
Compression ratio 24 : 1
Fuel Diesel Fuel No.2-D (ASTM D975)
Lubricant
(API classification)
above CF grade
Dimension mm (in.)
(length × width × height)
497.6 × 396.0 × 590.1
(19.59 × 15.59 × 23.2)
591.3 × 396.0 × 607.0
(23.28 × 15.59 × 23.90)
Dry weight
(BB Spec.) kg (lbs.)
95
(209)
110
(242.5)
Starting system Cell starter (with glow plug)
Starting motor 12 V, 1.2 kW
Charging generator 12 V, 480 W
Recommended battery capacity 12 V, 65 AH, equivalent 12 V, 75 AH, equivalent
EU engine family name HKBXL01.5BCB HKBXL01.5BCB
CO
2
Emission data g/kWh
Non-road steady-state test cycle
1018.0 1018.0