Kubota KX 016-4 User Manual

Name: Kubota KX 016-4
Brand: Kubota
Rating: 4 (1 reviews)

98 pages

To Next Page

(Australia)

RG158-8193-1

1BAAACDAP2310

Table of Contents5
Safe Operation9
Care of Danger, Warning and Caution Labels21
Dealer Service23
Technical Data24
Description of Machine Parts25
Instrument Panel and Control Elements26
Checks before Start29
- Daily Checks29
  - Working Light Switch29
- Danger, Warning and Caution Labels30
Operation of the Engine30
- Starting the Engine30
- Starting the Engine under Cold Conditions36
  - Precautions in Case of Overheat36
- Stopping the Engine36
  - Engine Stop Knob37
- Starting with an Auxiliary Battery37
  - Observe Following Guidelines When Starting with an Auxiliary Battery37
Excavator Operation38
- Running-In of the New Excavator38
  - Do Not Work with Full Engine Rpm's or Full Loads During the First 50 Working Hours38
  - Oil Change in the Run-In Stage38
- Starting38
- Operation of Track Width Change41
- Operation of the Dozer41
  - Adjustment of the Dozer Width42
- Driving42
  - Drive Levers(Right,Left)44
  - Travel Speed Switch44
- Turns45
  - Pivot Turn45
  - Spin Turn46
- Up and Downhill Driving47
- Two Pattern Selection System(Tpss)48
  - Pattern Change48
- Operation of the Boom49
- Operation of the Arm49
- Operation of the Bucket50
- Swivel(Unit Swing)Operation50
- Boom Swing Operation51
- Auxiliary Port Operation51
- Parking on a Slope52
- Important Information on Excavator Operation52
Transporting the Excavator on a Vehicle53
Lifting of the Excavator55
Maintenance57
- Maintenance Intervals58
- Opening and Closing of Parts60
- Daily Checks62
Regular Checks and Maintenance Work67
- Every 50 Service Hours67
- Every 200 Service Hours69
- Every 250 Service Hours70
- Every 500 Service Hours72
- Every 1000 Service Hours73
  - Hydraulic Oil Check for Machines with Hydraulic Breakers73
  - Hydraulic Oil Change(Including Replacing Suction Filter in Hydraulic Tank)74
- Every 1000 Service Hours or Once Ayear75
  - Replacing Air Filter Element75
- Every 1500 Service Hours75
  - Checking Fuel Injection Nozzle(Injection Pressure)75
- Every 2000 Service Hours75
  - Changing Front Idler and Track Roller Oil75
  - Checking Alternator and Starter Motor75
- Every 3000 Service Hours75
  - Checking Injection Pump75
- Annual Service75
- Biennial Servicing76
Other Adjustments and Replacements78
- Purging Fuel System78
- Adjustment of Tracks78
  - Rubber Tracks78
  - Special Information When Using Rubber Tracks79
- Changing the Bucket80
- Fuses80
Troubleshooting82
- Kubota I.C.s. Navigation List of Messages84
Operation under Cold Weather Conditions89
- Preparation for Operation in Cold Weather89
- Procedure after Done Work89
Long Storage90
Recommended Oils92
Appendices93
- Main Dimensions93
Lifting Capacity94

Questions and Answers:

Need help?

Do you have a question about the Kubota KX 016-4 and is the answer not in the manual?

Kubota KX 016-4 Specifications

General

Make	Kubota
Model	KX 016-4
Category	Excavators
Bucket Capacity	0.04 m³
Max Digging Depth	2250 mm
Width	990 mm
Blade Width	990 mm
Transport Length	3710 mm

Related product manuals

Kubota KX 018-4

98 pages

Kubota Super Series 2 KX 91-3

Kubota KX 016-4 User Manual

Table of Contents

Questions and Answers:

Kubota KX 016-4 Specifications

Related product manuals