To Next PageTo Next Page
Need help?Do you have a question about the Kubota L4701 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Cylinders | 4 |
| Brakes | Wet disc |
| Hydraulic System Type | Open center |
| 3-Point Hitch | Category I |
| Engine Power | 47 hp |
| Engine Power (Gross) | 47.3 HP |
| PTO Horsepower | 39.5 hp |
| Displacement | 148.5 cu in |
| Fuel Capacity | 11.6 gal (44 L) |
| Fuel Tank Capacity | 11.6 gal (44 L) |
| Number of Gears | 8 forward and 8 reverse |
| Hydraulic Pump Capacity | 8.3 GPM |
| Height | 91.7 inches (232 cm) |
| Tire Size (Front) | 7-16 |
| Tire Size (Rear) | 14.9-24 |
| Transmission | Gear Drive or HST (Hydrostatic) |
Key safety rules for operating, parking, and driving the tractor.
Safety guidelines for ROPS, PTO, 3-point hitch, and servicing.
Information on safety labels and protecting children around the tractor.
Information on dealer services, parts, and warranty coverage.
Guidelines for safely decommissioning and disposing of the tractor.
Detailed technical specifications of the tractor model.
A table listing the tractor's traveling speeds in various conditions.
Guidelines on the types and sizes of implements that can be used.
Description of the dashboard layout, indicators, and warning lamps.
Operation of clutch, gear shifts, throttle, and shuttle lever.
Operation of speed pedal, range lever, and cruise control for HST models.
Operation of brake, parking brake, seat belt, ROPS, and front wheel drive.
List of daily checks to perform before starting the tractor.
Safety measures and general advice for engine operation.
Information on emission control systems like the DPF muffler and regeneration.
Steps and modes for DPF regeneration.
How to perform DPF regeneration in auto mode and warning levels.
How to manage DPF regeneration in inhibit and parked modes.
Advice and best practices for DPF regeneration.
Information on the antifrost heater for the oil separator.
Details on the optional block heater for cold weather starting.
Procedures for warming up the engine after starting.
Safety instructions and steps for jump starting the tractor.
Initial operating procedures and break-in recommendations for a new tractor.
Safety guidelines for getting on and off the tractor.
Instructions for folding, raising, and adjusting the ROPS.
Conditions requiring immediate engine shutdown.
Understanding and responding to dashboard warning indicators.
Checking the fuel level and precautions for refueling.
Reading and interpreting the coolant temperature gauge.
Function of the hour meter for tracking operating time.
Reading engine speed and PTO speed.
How and when to use the differential lock system.
Safety guidelines for road operation, including braking and SMV signs.
Safety advice for operating on uneven ground and inclines.
Guidelines for safely towing or transporting the tractor.
How to operate and maintain the power steering system.
General information and safety for PTO operation.
How to engage and disengage the PTO clutch.
Procedures for using the PTO system while the tractor is stationary.
Maintenance and handling of PTO shaft covers and caps.
General introduction to the 3-point hitch and drawbar components.
Procedures for attaching implements to the 3-point hitch.
Adjusting the drawbar length and using the swing drawbar.
Controls for managing the 3-point hitch implement's position and draft.
Using the hydraulic block type outlet for external implements.
Information on installing and using remote control valves.
Information on tire inflation pressure and approved tire types.
Procedures for adjusting wheel tread width for stability and alignment.
Adding weights or liquid to the tractor for stability and traction.
Recommended maintenance schedules based on operating hours.
Recommended fluids, fuels, and their capacities for the tractor.
Routine maintenance tasks performed at regular intervals.
Guidelines for proper disposal of waste fluids and materials.
Procedures for opening and accessing the hood and engine covers.
Daily inspection items to ensure safe operation and performance.
Procedure to check and drain water from the fuel system's water separator.
How to check and maintain the engine oil level.
How to check and maintain the transmission fluid level.
How to check and maintain the engine coolant level.
Procedure for cleaning the air cleaner evacuator valve.
Cleaning debris from the radiator and grill for proper airflow.
Inspecting brake and clutch pedal free travel and operation.
Inspecting brake pedal free travel and operation for HST models.
Inspecting instrument panel components for proper function.
Inspecting headlights, turn signals, and hazard lights for damage.
Verifying the condition of the seat belt and ROPS hardware.
Inspecting wiring, battery, and mechanical controls for proper function.
Applying grease to fittings on the front axle and linkage for 2WD models.
Applying grease to fittings on the front axle supports and other points for 4WD models.
Testing the safety switches for the engine start system.
Testing the safety switches for the engine start system on HST models.
Verifying the function of the operator presence control system.
Ensuring wheel bolts are tightened to the correct torque specifications.
Inspecting tie-rod dust covers for damage to prevent wear.
Cleaning the primary element of the air cleaner for optimal performance.
Adjusting the fan belt tension to ensure proper operation.
Inspecting fuel grommets for cracks or leaks.
Adjusting clutch pedal free travel for manual transmission.
Adjusting brake pedal free travel for safe and equal braking.
Assessing the battery's charge status using the indicator.
Replacing the transmission oil filter cartridge on HST models.
Measuring and adjusting front wheel toe-in for proper alignment.
Steps to adjust front wheel toe-in for 2WD tractors.
Steps to adjust front wheel toe-in for 4WD tractors.
Procedure for draining and refilling engine oil.
Steps for replacing the engine oil filter cartridge.
Procedures for transmission fluid change and filter replacement.
Steps for replacing the fuel filter.
Cleaning the water separator for the fuel system.
Adjusting the front axle pivot for proper steering and stability.
Procedure for draining and refilling front axle case oil on 4WD models.
Information on adjusting engine valve clearance (consult dealer).
Replacing the primary and secondary air cleaner elements.
Inspecting the exhaust manifold for proper condition.
Checking the fuel supply pump for proper function.
Inspecting and cleaning the Exhaust Gas Recirculation (EGR) system.
Procedures for cleaning ash from the DPF muffler (consult dealer).
Inspecting fuel lines for wear, leaks, and proper clamp tightness.
Inspecting intake air lines for wear, leaks, and proper clamp tightness.
Inspecting radiator hoses and clamps for damage or leaks.
Inspecting power steering lines for wear, leaks, and proper clamp tightness.
Inspecting oil cooler lines for wear, leaks, and proper clamp tightness.
Inspecting oil separator hoses for wear, leaks, and proper clamp tightness.
Verifying the operation of the antifrost heater for the oil separator.
Inspecting the DPF sensor pipe for blockages or damage.
Inspecting the EGR pipe for blockages or damage.
Procedures for flushing the cooling system and replacing coolant.
Removing air from the fuel system after filter replacement or tank emptying.
Removing accumulated water from the clutch housing.
Procedure for replacing blown fuses in the electrical system.
Replacing slow-blow fuses to protect electrical cabling.
Replacing burnt-out light bulbs for various tractor lights.
Procedures for replacing the tractor's headlamp bulb.
Replacing fuel lines due to deterioration or damage.
Replacing intake air lines due to deterioration or damage.
Replacing power steering lines due to deterioration or damage.
Replacing oil cooler lines due to deterioration or damage.
Replacing oil separator hoses due to deterioration or damage.
Proper procedures for storing the tractor for extended periods.
Steps to prepare the tractor for use after storage.
Common engine problems, their causes, and corrective actions.
Understanding engine error codes displayed on the LCD.
Common power train issues and their solutions.
List of available optional equipment for the tractor.
