Kubota L47TL User Manual

English (U.S.A.)
Code No. 32821-1957-1
M62TL
L47TLMODELS
OPERATOR'S MANUAL
1HNADAAAP1200
L
4
7
T
L
·
M
6
2
T
L
©
KUBOTA Corporation 2015
PRINTED IN JAPAN
READ AND SAVE THIS MANUAL

Kubota L47TL Specifications

General

Brand	Kubota
Model	L47TL
Category	Tractor
Language	English

Summary

SAFE OPERATION

Tractor Pre-Operation Checks and Safety

General precautions and checks before starting tractor operations.

Safe Tractor Operation Practices

Safe practices for starting and operating the tractor, including warnings.

Safe Operation on Slopes and Roads

Precautions for operating on slopes and roads to prevent accidents.

Safe Parking and PTO Operation

Procedures for safe parking and operating the Power Take-Off (PTO).

3-Point Hitch Use and Servicing Safety

Guidelines for using the 3-point hitch and safety during tractor servicing.

Hydraulic and Fuel System Safety Precautions

Safety precautions for hydraulic fluid and high-pressure fuel systems.

LOADER SAFETY PRECAUTIONS

Loader Pre-Operation Checks

Essential checks and safety precautions before using the loader.

Loader Operation and Servicing Safety

Safe operation, parking, and servicing procedures for the loader.

TRACTOR SAFETY LABELS

Tractor Safety Label Identification

Identifies and explains various safety labels on the tractor.

Operational Warning Labels

Explains specific warning labels related to operational hazards.

BATTERY SAFETY PRECAUTIONS

Maintenance-Free Battery Safety

Safety precautions and warnings related to the maintenance-free battery.

Battery Danger and Poison Warnings

Specific hazard warnings associated with the battery.

LOADER SAFETY LABELS

Loader Safety Label Identification

Identifies and explains safety labels specific to the loader.

SAFETY LABEL MAINTENANCE

Care and Replacement of Safety Labels

Instructions on how to maintain and care for safety labels on the tractor.

TRACTOR SERVICING INFORMATION

Warranty and Tractor Disposal

Details of the KUBOTA warranty and procedures for scrapping the tractor.

TRACTOR TECHNICAL SPECIFICATIONS

Tractor Specification Summary

Provides detailed technical specifications for the L47 and M62 tractor models.

Tractor Dimensional Specifications

Lists the physical dimensions of the tractor with and without the loader.

Tractor Traveling Speed Chart

Tables showing forward and reverse traveling speeds based on gear and speed control settings.

LOADER TECHNICAL SPECIFICATIONS

Loader and Bucket Specs

Technical specifications for loader and bucket models.

Loader Operational Performance

Performance data like lift capacity, breakout force, and cycle times for the loader.

Loader Component Identification

Illustrates and defines key components of the loader system.

IMPLEMENT COMPATIBILITY AND LIMITATIONS

Implement Size and Weight Restrictions

Guidelines on implement size, weight, and drawbar load limits for tractor compatibility.

Implement Specifications by Type

Lists various implements and their maximum weight, width, and capacity specifications.

TRACTOR INSTRUMENT PANEL AND CONTROLS

Control Layout Overview

Identifies and locates various controls on the tractor's instrument panel.

Instrument Panel Indicators and Gauges

Explains the function of each indicator light and gauge on the instrument panel.

IntelliPanel(TM) Display Functions

Describes the IntelliPanel display messages, symbols, and their meanings.

PRE-OPERATION DAILY CHECKS

Tractor Daily Inspection Checklist

Essential daily inspection items to ensure tractor safety and serviceability before operation.

Loader Pre-Operation Checks and Rear Ballast

Pre-operation checks for the loader and importance of rear ballast for stability.

ENGINE OPERATION AND DPF SYSTEM

DPF Muffler and Exhaust System

Information on the Diesel Particulate Filter (DPF) muffler and its function.

DPF Handling, Fuel, and Oil Guidelines

Key points for handling the DPF system, including fuel and oil requirements.

DPF Regeneration Modes and Process

Explains the auto and manual regeneration modes for the Diesel Particulate Filter.

DPF PM Warnings: Auto Mode Procedures

Details PM warning levels and required actions for Auto Regeneration Mode.

DPF PM Warnings: Inhibit Mode Procedures

Explains PM warning levels and procedures for Regeneration Inhibit Mode.

DPF Parked Regeneration Procedure

Step-by-step guide for performing parked regeneration of the DPF.

DPF Regeneration Tips and Engine Start

Advice on DPF regeneration and tractor driving position before starting.

ENGINE STARTING PROCEDURES

Engine Start Sequence and Checks

Detailed steps for starting the engine, including fuel, levers, and indicator checks.

Easy Checker(TM) Lamp Checks

Guidance on checking instrument panel indicators before starting the engine.

IntelliPanel(TM) Start-up Messages

Explains troubleshooting messages displayed on the IntelliPanel during engine start.

Cold Weather Engine Starting

Specific procedures for starting the engine in cold weather conditions.

ENGINE SHUTDOWN AND WARM-UP PROCEDURES

Engine Stop and Warm-up Process

Procedures for safely stopping the engine and warming it up.

ENGINE JUMP STARTING

Jump Start Procedure

Step-by-step guide for safely jump starting the tractor's engine.

TRACTOR OPERATION AND CONTROLS

New Tractor Break-in and Oil Change

Precautions for operating a new tractor and importance of oil changes.

Operator Seat and Glove Box

Adjustments and features of the operator's seat and glove box.

Seat Belt and Steering Wheel Adjustment

Proper use of seat belts and adjustment of the tilt steering wheel.

Lights, Turn Signals, and Hazard Lights

Operation of lights, turn signals, and hazard lights for visibility and safety.

Horn and Tractor Lights Operation

Operation of the horn and identification of tractor lights.

Brake Pedal Operation and Implement Raising

Safe operation of brake pedals and raising implements.

Travel Speed Selection and HST Response

Controlling travel speed and adjusting HST response settings.

H-DS Lever and HST Mode Selection

Operation of H-DS lever and selection of HST modes (MANUAL, STALL GUARD).

Stall Guard and Auto H-DS/Stall Guard

Explanation of STALL GUARD and AUTO H-DS/STALL GUARD features.

Throttle-Up Switch and Range Gear Shift

Using Throttle-Up and shifting the range gear lever.

Front Wheel Drive and Throttle Lever Operation

Operation of front wheel drive and throttle levers.

Parking Brake Release and Speed Control Pedal

Procedures for releasing the parking brake and using the speed control pedal.

ATA, Crawl Control, and Stopping Procedures

Operation of ATA, crawl control, and stopping procedures.

INTELLIPANEL(TM) DISPLAY AND FUNCTIONS

Display Modes and Trip Meter/Clock Settings

Navigating IntelliPanel displays and managing trip meter and clock settings.

Service Inspect Mode and Driving Checks

Using service inspect mode and performing checks during driving.

Easy Checker(TM) Indicators and Warnings

Understanding Easy Checker indicators for oil, electrical, fuel, water, emission, and master warnings.

INSTRUMENT PANEL GAUGES AND INDICATORS

Fuel, Coolant, and Tachometer Gauges

Reading and understanding the fuel gauge, coolant temperature gauge, and tachometer.

TRACTOR PARKING AND OPERATING TECHNIQUES

Parking and Differential Lock Operation

Safe parking procedures and operation of the differential lock.

TRACTOR OPERATION MODES AND SAFETY

Road, Slope, and Transport Safety

Guidelines for road, slope, and safe transport operation.

Power Steering and Reversing Seat

Usage of power steering and reversing the operator's seat.

LOADER OPERATION

Loader Controls and Bucket Filling

Understanding loader controls and technique for filling the bucket.

Safe Load Lifting and Carrying

Safe practices for lifting and carrying loads with the loader.

Bucket Operations and Loading from Bank

Procedures for dumping, lowering, float control, and loading from a bank.

Loader Peeling and Scraping Techniques

Methods for peeling and scraping material with the loader bucket.

Loading Trucks/Spreaders and Backfilling

Techniques for loading trucks/spreaders and backfilling with the loader.

Heavy Objects, Valve Lock, and Boom Lock Safety

Safety for heavy objects, valve lock, and boom lock procedures.

Bucket Level Indicator and Self-Leveling

Using the bucket level indicator and the loader's self-leveling feature.

Self-Leveling Modes and Usage

How to use self-leveling for pallet forks and bucket operations.

Self-Leveling Adjustment Procedure

Step-by-step guide for adjusting the self-leveling mechanism.

Attaching Implements with Quick Coupler

Procedures for attaching implements using the quick attach coupler.

Quick Coupler Attachment Safety

Safety checks and verification for attaching implements with the quick coupler.

Detaching Implements and Hydraulic Coupler Switch

Procedures for detaching implements and operating the hydraulic quick coupler switch.

POWER TAKE-OFF (PTO) OPERATION

PTO Safety and Clutch Control

Safety warnings and operation of the PTO clutch control switch.

Stationary PTO Use and IntelliPanel(TM) PTO Info

Procedures for stationary PTO use and checking PTO status on IntelliPanel.

PTO Shaft Cover and Cap Maintenance

Importance of keeping PTO shaft covers and caps in place for safety.

3-POINT HITCH AND DRAWBAR SYSTEMS

3-Point Hitch Attachment and Category Selection

Preparation and selection of categories for attaching 3-point hitch implements.

Top Link Holes and Drawbar Installation

Guidance on selecting top link holes and drawbar installation.

Implement Attachment/Detachment and Lifting Rod

Procedures for attaching/detaching implements and adjusting the lifting rod.

Top Link, Check Chains, and Drawbar Adjustment

Adjusting top link, check chains, and drawbar length for proper implement use.

3-Point Hitch Reinstallation and Linkage Handling

Steps for reinstalling the 3-point hitch and handling top link/lifting rods.

3-Point Hitch Storage Procedures

Procedures for storing the 3-point hitch assembly.

Top Link Pin and Lower Link Installation

Information on top link pin and installation of the lower link.

TRACTOR HYDRAULIC UNIT SYSTEMS

3-Point Hitch Control System Features

Controls for 3-point hitch (position, float) and use of restricting plate.

Float Control, Lowering Speed, and Directional Levers

Using float control, adjusting lowering speed, and directional lever positions.

Rear Remote Hydraulic System Operation

Connecting/disconnecting rear remote couplers and operating the remote valve lever.

Front Remote Hydraulic System Coupler Installation

Steps for installing the hydraulic quick coupler on the front outlet.

Front Hydraulic Control Switch and Coupler Operations

Operation of front hydraulic control switch and remote coupler procedures.

Multi-Coupler System and 2P-Coupler Connection

System for easy hydraulic hose connection and use of 2P-Multi-Coupler.

2P-Multi-Coupler Disconnection Procedures

Procedures for disconnecting the 2P-Multi-Coupler.

2P-Multi-Coupler Final Steps and Maintenance

Final steps for using the 2P-Multi-Coupler, including dust cover and lever locking.

Hydraulic Control Unit Usage Chart

Chart for selecting hydraulic control unit settings based on implement and soil conditions.

TIRES, WHEELS, AND BALLAST

Tire Safety and Inflation

Safety warnings and recommended tire inflation pressures for tractor models.

Tire Treads and Wheel Mounting

Tire tread specifications and details on wheel mounting, bolt torques.

TRACTOR BALLAST

Front and Rear Ballast Guidelines

Importance and methods for adding front and rear ballast for tractor stability.

Liquid Ballast in Rear Tires

Using water/calcium chloride for tire ballast, including safety.

TRACTOR MAINTENANCE SCHEDULE

Service Intervals and Maintenance Notes

Table outlining maintenance tasks and their recommended service intervals with important notes.

PERIODIC TRACTOR MAINTENANCE

Hood and Side Cover Access

Step-by-step instructions for opening the hood and removing side covers.

Covers, Daily Inspection, and Refueling

Procedures for removing covers and performing a daily walk-around inspection.

Fuel System Checks and Water Separator

Procedures for checking fuel and refueling, and draining the water separator.

Engine Oil and Transmission Fluid Checks

How to check engine oil and transmission fluid levels.

Coolant Level and Cooling System Cleaning

Checking coolant level and cleaning the grill, radiator screen, and oil cooler.

Air Cleaner, DPF Muffler, and Brake Pedal Checks

Checking dust indicator, DPF muffler, and brake pedals.

Instrument Panel, Lights, and Movable Parts Checks

Inspecting panel gauges, lights, seat belt, ROPS, and movable parts.

50-HOUR PERIODIC MAINTENANCE

Grease Fittings Lubrication

Lubrication schedule and points for grease fittings every 50 hours.

100-HOUR PERIODIC MAINTENANCE

Engine Start System Safety Checks

Testing safety systems like operator presence control and brake interlocks.

Operator Presence Control and Wheel Nut Torque Checks

Testing operator presence control and checking wheel nut torque.

100-HOUR PERIODIC MAINTENANCE

Air Cleaner Primary Element Cleaning

Procedure for cleaning the primary element of the air cleaner.

200-HOUR PERIODIC MAINTENANCE

Fan Belt Tension and Brake Pedal Adjustment

How to adjust fan belt tension and brake pedal free travel.

100-HOUR PERIODIC MAINTENANCE

Rear Parking Brake and Battery Checks

Adjusting rear parking brake lever and checking battery condition.

Battery Charging Procedures

Procedures and safety precautions for charging the tractor battery.

200-HOUR PERIODIC MAINTENANCE

Transmission Oil Filter Replacement

Steps for replacing the transmission oil filter.

200-HOUR PERIODIC MAINTENANCE

Front Wheel Toe-In Adjustment

Adjusting toe-in for proper front wheel alignment and tire wear.

400-HOUR PERIODIC MAINTENANCE

Water Separator Cleaning and Oil Filter Replacement

Procedures for cleaning water separator and replacing engine oil filter.

Engine Oil Change Procedure

Procedures for draining and refilling engine oil.

Transmission Fluid and Hydraulic Filter Change

Procedures for changing transmission fluid and replacing hydraulic oil filter.

Fuel Filter Replacement and Front Axle Oil Change

Steps for replacing fuel filter and changing front axle case oil.

1000-HOUR/1-YEAR PERIODIC MAINTENANCE

Air Cleaner Element Replacement and Nozzle Pressure Check

Replacing air cleaner elements and checking fuel injection nozzle pressure.

1500-HOUR PERIODIC MAINTENANCE

Oil Separator Element Replacement and PCV Valve Check

Replacing oil separator element and checking PCV valve.

2000-HOUR/2-YEAR PERIODIC MAINTENANCE

EGR Cooler Check and Cooling System Flush

Checking/cleaning EGR cooler and flushing the cooling system.

Cooling System Flush and Antifreeze

Procedures for flushing cooling system and important information on antifreeze.

Antifreeze Safety and Coolant Mixing

Safety precautions for antifreeze and guidelines for coolant mixing.

3000-HOUR PERIODIC MAINTENANCE

Turbocharger, Supply Pump, EGR, and DPF Muffler Checks

Checks for turbocharger, supply pump, EGR system, and DPF muffler cleaning.

1-YEAR PERIODIC MAINTENANCE

Fuel Line and Radiator Hose Checks

Checking fuel lines and radiator hoses for tightness and damage.

Overheating Precautions and Intake Air Line Check

Actions for overheating and checking intake air lines.

Hose and Line Checks (Oil Separator, Antifrost, Oil Cooler, Power Steering, Exhaust, DPF Pipe, EGR)

Checks for oil separator hose, antifrost heater, oil cooler/power steering lines, exhaust manifold, DPF pipe, EGR pipe.

2-YEAR AND 4-YEAR PERIODIC MAINTENANCE

Hose and Cable Replacements (Parking Brake, Radiator, Power Steering, Oil Cooler, Fuel)

Replacing various hoses and the rear parking brake cable.

SERVICE AS REQUIRED PROCEDURES

Fuel System Bleeding Procedure

Procedures for bleeding the fuel system to remove air.

SERVICE AS REQUIRED

Clutch Housing Water Drain and Fuse Replacement

Draining water from clutch housing and replacing fuses.

Light Bulb Replacement and Fuse Protection Circuits

Replacing light bulbs and identifying fuses for protected circuits.

LOADER MAINTENANCE

Loader Daily Checks and Hydraulic Safety

Daily inspection for loader and safety precautions for hydraulic fluid.

Loader Lubrication Schedule

Lubrication schedule and points for the loader.

Loader General Torque Specifications

Torque specifications for various screws, bolts, and nuts used on the loader.

TRACTOR STORAGE PROCEDURES

Tractor Storage and Retrieval

Procedures for storing the tractor and preparing it for use after storage.

ENGINE TROUBLESHOOTING

Engine Problem Diagnosis Table

Table of common engine problems, their causes, and corrective measures.

INTELLIPANEL(TM) TROUBLESHOOTING

IntelliPanel(TM) Error Codes

Lists IntelliPanel error codes and operator actions for troubleshooting.

More IntelliPanel(TM) Error Codes

Continues listing IntelliPanel error codes and operator actions.

OPTIONAL EQUIPMENT

List of Available Options

Lists optional equipment available for the tractor.

MANUAL APPENDICES

Manual Index

Alphabetical index of topics covered in the manual with corresponding page numbers.