Why will my Kubota T2380 engine not idle?
If your Kubota Tractor engine will not idle, it could be due to a spark plug not gapped correctly or a faulty spark plug. Refer to the table below for the cause and its corrective measure.
Why are the grass tips jagged and turn grayish brown after cutting with my Kubota Tractor?
If the grass tips are jagged and turn grayish brown when using your Kubota Tractor, it could be because the blades are dull or worn, or the mower deck is not level. Refer to the table below for the cause and its corrective measure.
Why is the machine operation not smooth on my Kubota Tractor?
If the machine operation of your Kubota Tractor is not smooth, it could be due to low hydrostatic transmission oil. Refer to the table below for the cause and its corrective measure.
Why are the blades scalping grass on my Kubota Tractor?
If your Kubota Tractor blades are scalping grass, it could be due to cutting height being too low, blades speed too fast, ridges in terrain, rough or uneven terrain, bent blade(s), low tire inflation or anti-scalp rollers not adjusted correctly. Refer to the table below for the cause and its corrective measure.
Why is my Kubota T2380 Tractor experiencing excessive vibration?
If your Kubota Tractor is experiencing excessive vibration, it could be due to debris on the mower deck or in the pulleys, a damaged drive belt or PTO belt twisted, damaged pulleys, pulleys out of alignment, or blades out of balance. Refer to the table below for the cause and its corrective measure.
Why is my Kubota Tractor engine knocking?
Understand limitations, controls, safety labels, and pre-operation checks.
Guidelines for safe use, including slopes, obstacles, and bystanders.
Safe procedures for transporting and storing the machine.
Step-by-step guide to attach the mower deck to the tractor.
Procedure to adjust the mower deck for a beautiful finish cut.
Steps for safely starting the engine, including brake and PTO engagement.
Starting in cold weather and testing safety device functionality.
Proper procedure to shut down the engine and warm it up.
Guidelines for breaking in a new machine for optimal performance and longevity.
Adjusting seat, using lights, lift lever, throttle, and speed pedals.
How to engage and disengage the cruise control for maintaining speed.
Tips for effective mowing, grass height, and appearance.
Procedure to set the desired cutting height for the mower.
Understanding KRA system modes and changing mower operation modes.
Schedule of required maintenance tasks based on operating hours.
Specifications for engine oil, transmission fluid, and fuel types.
Daily checks, opening hood, and specific service tasks.
Procedures for checking oil, air cleaner, spark plug, and fuel filter.
Checking belts, blades, tires, grease fittings, and brake pedal.
Checking battery condition and charging procedures.
Steps to clean and prepare the machine for extended storage.
Diagnosing and resolving common engine and battery performance problems.
Resolving issues with machine movement, mower cut, and belt slipping.
To Next Page
General