Kubota WSM L3540-II User Manual

ENGINE
L3540-II, L4240-II, L5040-II, L5240-II, L5740-II , WSM
1-S42
Valves
1. Remove the valve caps (2).
2. Remove the valve spring collet (3), pushing the valve spring
retainer (4) by valve spring replacer (1).
3. Remove the valve spring retainer (4), valve spring (5) and valve
stem seal (6).
4. Remove the valve (7).
(When reassembling)
• Wash the valve stem and valve guide hole, and apply engine oil
sufficiently.
• After installing the valve spring collets, lightly tap the stem to
assure proper fit with a plastic hammer.
IMPORTANT
• Don't change the combination of valve and valve guide.
9Y1211167ENS0036US0
(1) Valve Spring Replacer
(2) Valve Cap
(3) Valve Spring Collet
(4) Valve Spring Retainer
(5) Valve Spring
(6) Valve Stem Seal
(7) Valve
KiSC issued 02, 2015 A

Kubota WSM L3540-II Specifications

General

Brand	Kubota
Model	WSM L3540-II
Category	Tractor
Language	English