10
GB
Assembly
Cookie Press
➃
Put the holder of the cookie attachment (without the moulding tool)
into the fastening ring and assemble the grinder according to pict. B.
Pay attention that the 3 pins of the conveyor screw are facing
outwards.
➄
Fix the fastening ring with several clockwise turns. To ensure a correct
function the fastening ring should be fixed carefully so the conveyor
screw can still be moved easily.
➅
Slide the moulding tool into the holder of the cookie attachment.
➆
Insert the crank.
➄
➅
➆
➇
Pict. B
BA Fleischwolf RAPID 13 1098 22 00.qxp_Layout 1 05.09.18 08:20 Seite 10
To Next Page
Loading...