Cooker Hood Installation (All Models)
• There is an air outlet at the top of the cooker hood that will remove bad odors.
• The materials to be used in cooker hood installation are provided.
• The wall or ceiling must be strong enough to hold the weight of the cooker hood.
• When making the electrical connection to the cooker hood, first switch off the fuse at the breaker
box.
• Use a pen to mark the center on the wall by drawing a line that extends upward from the ceiling.
This will make the installation much easier.
• If the first sheet metal chimney is short, extend it by using the second sheet metal chimney.
• Use a plastic clamp or strong tape during installation to make the pipe more secure.
To Next Page
Loading...