INSTALLATION INSTRUCTIONS FOR TELESCOPIC HOODS
INSTALLATION VIDEOS OF ALL PRODUCTS AVAILABLE ON KÜGERR’S OFFICIAL WEBSITE
1. There are 4 installation holes on the top of your cooker hood.
2. Use your installation template to drill your cabinet with a Q10 mm drill at the appropriate places
and install your product using the screws included with the product.
3. Make sure that the electrical cord is not pinched or crushed during installation. Without removing
the plug of your device, drill a hole so that the plug passes easily through. If the electrical cord is
damaged, it must be replaced by an authorized service provider.
4. Use an air escape pipe made of PVC or aluminum. Never narrow the diameter of the pipe you use
for the chimney outlet. Let the air out through the shortest possible way without using any pipe bends
(for chimney use). Make sure that the pipe connection is tight enough not to come out when the cooker
hood is working at the highest operating range. Using a strong tape or clamp during installation
makes the pipe more secure.
To Next Page
Loading...