The KUOO KIRIN S1 is an electric bicycle designed for personal transportation. This manual provides comprehensive instructions for its safe operation, assembly, usage, maintenance, and disposal. Users are advised to read the entire instruction manual before operating the bicycle to ensure their safety and the safety of others.
Function Description
The KUOO KIRIN S1 is an electric bicycle that offers an assisted riding experience. It is equipped with a motor to aid in propulsion, making it suitable for various terrains, primarily smooth roads with slopes less than 17 degrees. The bicycle features a foldable design, allowing for convenient storage and transport.
Key functions include:
- Power On/Off: The device can be powered on or off by pressing the power button for 3-5 seconds.
- Speed Control: Users can adjust the speed using the speed-up finger control. To maintain a desired speed, the user must hold the speed for 6 seconds, and then press the button to cancel.
- Display Information: The screen provides essential riding data, including the rest of the power, current speed (in km/h or mp/h), speed mode (Mode 1-white, Mode 2-orange, Pattern 3-red), controller temperature status, application status (open/closed), headlight status (on/off), and indicator status error (on/off). An error indicator will light up if there is no power, prompting the user to stop and turn off the power.
- Headlights: The bicycle is equipped with headlights for visibility.
- Brake System: A brake lever is provided for stopping the bicycle.
- Folding Mechanism: The bicycle can be folded and unfolded for portability. This involves pulling down a folding latch and pushing the stem down to the pedal for folding, and pulling the stem up off the pedal until a click sound is heard for unfolding.
Usage Features
The KUOO KIRIN S1 is designed for ease of use, but adherence to safety guidelines is crucial.
Assembly and Setup:
- Most parts of the S1 are pre-assembled from the factory. Users are required to perform minor assembly, such as attaching the handlebars using four M5 screws, ensuring they are firmly fastened.
- To support the bicycle, locate the support beside the pedal and push it down.
- Before the first ride, it is mandatory to charge the battery for at least 4 hours. Subsequent charges should be around 3 hours for a 4Ah battery, 4.5 hours for a 6Ah battery, and 5.5 hours for a 7.5Ah battery. The charging light will be red during charging and turn green when complete.
Riding Instructions:
- Safety First: Always wear protective clothing, including a helmet, elbow pads, and knee pads. The S1 is designed for a single rider and has a maximum load capacity of 100kg.
- Starting: Place one foot on the pedal and hold both handles. Push off with the other foot to start sliding, then press the speed dial button to engage the motor.
- Stopping: To stop, release the acceleration dial and use the brake dial to gradually slow down.
- Practice: It is recommended to practice riding until proficient with all functions, including getting on, moving forward, turning, stopping, and getting off.
- Terrain: The S1 is suitable for smooth roads and can handle slopes up to 15 degrees, though riding on slopes is not generally recommended. Avoid riding on slopes, with pedestrians, or over obstacles until fully proficient.
- Footwear: Wear flat shoes for better flexibility and stability while riding.
- Obstacles: Avoid passing through anything that might get stuck in or under the wheels.
Display Controls:
- Power: Press for 3-5 seconds to turn on or off.
- Speed Control: To cancel a set speed, hold the speed for 6 seconds and then press the button.
- Pattern: Choose between 2 or 3 patterns.
- Light: Press three times quickly to switch between km/h and mp/h display units.
Maintenance Features
Proper maintenance ensures the longevity and optimal performance of the KUOO KIRIN S1.
Cleaning:
- Preparation: Always turn off the scooter before cleaning.
- Method: Use a dry cloth to scrub the bicycle.
- Precautions: Avoid contact with liquids. Do not use alcohol or detergent. Never spray liquid directly onto any part of the scooter. Do not immerse the product or its components in water.
Storage:
- Charging: Charge the battery before storing the bicycle, and recharge it every three months to extend battery life.
- Environment: Cover the S1 to prevent dust from entering. Do not store it in a dusty environment, as this can cause damage.
- Temperature and Moisture: Avoid storing the bicycle in unstable temperatures, or in areas with water or moisture, as these can damage the batteries and electrical circuits.
Transport:
- Folding: Always close and fold the scooter before moving, lifting, or transporting it. The S1 weighs approximately 12.35 kg.
Battery Care:
- Charging Time: Adhere to the recommended charging times (3 hours for 4Ah, 4.5 hours for 6Ah, 5.5 hours for 7.5Ah). Overcharging can negatively affect battery life and performance.
- Usage During Charging: Never use the scooter while it is charging.
- Long-term Storage: To extend battery life, charge the scooter at least every three months, even if not in use.
Scrap Disposition:
- Environmental Responsibility: Do not burn, bury, or dispose of the S1 or its battery with household garbage. Improper disposal of a broken or burning battery can cause danger and environmental pollution. Users must obey local laws for careful disposal.
Warranty:
- The S1 electric scooter comes with a one-year warranty from the date of purchase, covering defects in material and workmanship under normal use and service. This warranty does not extend if the product is repaired or replaced.
- The warranty specifically excludes damage due to transport, improper storage, misuse, failure to follow instructions, unauthorized changes or repairs, abrasion, or accidents. The manufacturer is not responsible for accidental use of the product, and liability will not exceed the purchase price.
To Next Page
Need help?
General
