Need help?Do you have a question about the KUHN MDS 735 and is the answer not in the manual?
Details essential safety practices before and during machine operation.
Lists detailed technical data for various MDS models.
Step-by-step guide for assembling the MDS 55-935 model.
Procedures and safety for connecting the spreader to a tractor's 3-point linkage.
Instructions for correctly installing and securing the PTO drive shaft.
Guidance on connecting the hydraulic controls for metering slides.
Principles and considerations for adjusting the spreader settings.
How to set the correct attachment height for normal and top dressing.
Instructions for setting application rates on M series models.
Instructions for setting application rates on K, R, and D series models.
Detailed guide on adjusting spreading disc vanes for optimal performance.
How to set disc vanes based on spreading chart recommendations.
Method for calculating the required fertiliser output per minute.
Step-by-step guide for performing a calibration check on the spreader.
Details on which parts need lubrication and how often.
Ensuring metering slides open evenly and simultaneously.
Safety precautions and steps for removing spreading discs.
Diagnosing common causes of uneven fertiliser distribution.
To Next Page
General