Need help?Do you have a question about the Kuhse KGM - KEA and is the answer not in the manual?
Important safety notes regarding handling, installation, and usage of the device and its components, including ESD and environmental considerations.
Step-by-step guide for mechanically installing the device onto a DIN rail, including removal instructions.
Details the device's power input requirements, protection mechanisms, and connection specifications.
Describes the two independent, isolated CAN bus interfaces and their protocol/baud rate configuration options.
Describes the device's initialization and boot-up sequence, including LED indications and duration.
Explains the status indications provided by the device's LEDs for interfaces, digital inputs, and relay outputs.
Guides on how to connect a laptop and access the device's web interface for initial configuration.
Details the username and password requirements for accessing the device's configuration interface.
Explains the main configuration screen layout and initial interface settings for ports.
Describes how to activate/deactivate hardware interfaces and save configuration changes.
Explains how to configure the device as a Modbus RTU Master, selecting an interface.
Details the configuration for the device as a Modbus RTU Slave, including device ID assignment.
Guides on configuring the device as a Modbus TCP Master, specifying port and Slave IP address.
Explains the configuration steps for the Modbus TCP Slave protocol, including port specification.
Provides detailed technical specifications for the KGM - KEA module, including interfaces and protocols.
To Next Page
General