Kukirin G2 Max - Charging, Transfer, and Seat Installation; Recharging Procedures; Transferring the Scooter; Optional Seat Assembly

9.RECHARGING
1. Open the waterproof plug of the charging port, then insert the charger plug intothe
charging port.
2. Put the charging plug into the power supply.
3.When the light is red which
10.TRANSFER
You can move it with one hand or two hands portable, asshown in the figure.
13
11.0PTIONAL SEAT ASSEMBLY INSTALLATION STEPS
1.Secure the seat bracket to the battery box 2.After the 4 screws are locked, loosen
pedal with 4 screws. Lf the seat for quick disassembly.
3. When the seat is ready to be removed and ‘4.When the seat is in place, tum it to
loosened, insert the seat into the it quickly and lock it.
corresponding card slot. pe
14