Kukirin S3 Pro - Operation Instructions; Control Panel Keys; Display Modes and Functions

11. Operation Instructions
1, keys:
A1. Leftturn signal key, A2. Buzzer key, A3. On/Off or set key, A4. Headlight switch
or gear key, AS right turn signal key.
2. Display mode: running state, engineering state.
2-1 [Left turn signal] : Press the left turn signal.
2-2[On/Off/Set] :
On/off: Long press the on/off button for more than 3 seconds to turn off or on the power.
Power-on state Hold down for more than 10 seconds to restore the factory defaults.
Setting: Press once to switch ODO (total km) and TRIP (single trip). ODO is the
total number of kilometers operated
ODO: Cumulative mileage, unit 1KM, maximum display 99999KM, more than 99999 keep
this value unchanged.
TRIP: Single trip, unit 0.1KM, maximum display 999.9KM, more than 999.9KM back
t00.0KM restart.
2-3 [Setting Mode] : Press the power button three times to enter the setting mode
Headlight key: parameter adjustment.
Right turn signal key: Adjust under parameters.
Left turn indicator key: By default, the adjustment parameters are saved and the running
status is returned.
2-4 [headlight switch; gear key] :
Long press the control light switch
Short press to switch gears
2-5 [Right turn signal key] : Switch on and off the right turn signal.