This document describes the Kunft KGS4503 and KGS4504 free-standing gas cooker, designed for domestic use. It is a gas appliance that includes both a hob and an oven.
Function Description
The Kunft KGS4503/KGS4504 is a free-standing gas cooker that combines a gas hob with multiple burners and a gas oven, providing a complete cooking solution. The hob allows for various cooking tasks, from simmering to rapid boiling, while the oven is suitable for baking, roasting, and other oven-based recipes. The appliance is designed to be user-friendly and efficient for everyday cooking needs.
Important Technical Specifications
The cooker has the following general specifications:
- Dimensions:
- Outer width: 500 mm
- Outer depth: 600 mm
- Outer height: 850 mm
- Inner width: 395 mm
- Inner depth: 405 mm
- Inner height: 330 mm
- Thermostat: 140 - 240°C
- Burner Specifications (KGS4503/KGS4504):
- Rapid Burner:
- Injector: 0.80 mm
- Power: 2.66 kW
- Consumption: 2.44 g/h, m³/h (Natural Gas) / 0.227 g/h, m³/h (LPG)
- Semi-Rapid Burner:
- Injector: 0.65 mm
- Power: 1.67 kW
- Consumption: 1.78 g/h, m³/h (Natural Gas) / 0.162 g/h, m³/h (LPG)
- Auxiliary Burner:
- Injector: 0.50 mm
- Power: 1.00 kW
- Consumption: 0.89 g/h, m³/h (Natural Gas) / 0.081 g/h, m³/h (LPG)
- Oven Burner:
- Injector: 0.75 mm
- Power: 2.55 kW
- Consumption: 2.66 g/h, m³/h (Natural Gas) / 0.241 g/h, m³/h (LPG)
The appliance is designed for connection to either LPG (Liquefied Petroleum Gas) or NG (Natural Gas), with specific injector sizes and consumption rates for each gas type. It requires a 32 Amp fuse for electrical connection.
Usage Features
- Controls: The hob burners and oven are controlled by knobs located on the front panel. These knobs are used to ignite the burners and adjust the flame intensity.
- Ignition: The appliance features an automatic ignition system. To ignite a burner, push and turn the corresponding knob counter-clockwise to the maximum flame symbol, then press and hold for 5-10 seconds to activate the gas safety system. If the burner extinguishes, repeat the process.
- Oven Operation: The oven burner is ignited similarly to the hob burners. The oven thermostat allows setting the desired temperature within the specified range.
- Safety Features:
- Flame Failure Device: All burners are equipped with a flame failure device that automatically cuts off the gas supply if the flame goes out.
- Ventilation: Proper ventilation is crucial for safe operation. The kitchen must be well-ventilated, and a mechanical ventilation device (extractor hood) is recommended.
- Gas Leakage Check: Regular checks for gas leaks using soapy water are advised, especially after installation or maintenance.
- Overheating Protection: The appliance is designed to prevent overheating, but users should always monitor cooking to avoid spills and fires.
- Child Safety: Children should be supervised when near the appliance and should not play with it.
- Installation:
- The appliance must be installed in a permanently ventilated room, compliant with applicable regulations.
- It should be placed on a flat, stable surface.
- The gas connection hose must be flexible, with a minimum length of 40 cm and a maximum of 125 cm.
- The appliance should be secured to the wall using a chain and hook screw supplied to prevent tipping.
- The electrical connection must be compatible with the appliance's specifications and installed by a qualified electrician.
Maintenance Features
- Cleaning:
- Hob: The hob should be cleaned regularly with a soft cloth and mild detergent. Avoid abrasive cleaners, scourers, or sharp metal scrapers that could damage the surface.
- Oven: The oven interior should be cleaned after each use, once it has cooled down. Use a soft cloth and soapy water. For stubborn stains, a specialized oven cleaner can be used. Remove trays and shelves before cleaning.
- Glass Surfaces: Clean glass surfaces with a special glass cleaning agent.
- Burners: The burner caps and rings should be cleaned regularly to ensure proper flame distribution. Ensure they are dry before placing them back.
- General Maintenance:
- Power Cord: Regularly check the power cord for any damage. If damaged, it must be replaced by authorized professionals.
- Gas Hoses: Inspect the gas connection hose periodically for wear or damage. Replace it if necessary.
- Servicing: Any repairs or maintenance beyond routine cleaning should be performed by authorized service personnel.
- Long Periods of Disuse: If the appliance will not be used for an extended period, turn off the gas supply and unplug it from the electrical outlet.
- Troubleshooting: The manual provides a troubleshooting guide for common issues such as burners not igniting, uneven flames, or gas leaks. Users are advised to consult this guide before contacting customer support.
The appliance is designed with durability in mind, and proper maintenance will ensure its longevity and safe operation.
Need help?
To Next Page
General
