ARIES User Manual_ March 2013 Edition
WARNING
This equipment is not to be used by anyone (children included) with physical or mental disabilities, or anyone
without the relevant experience and knowledge, unless they have received instructions on using the
equipment and are supervised by a responsible person to ensure their safety.
This equipment is not suitable for collecting hazardous dust.
Using the machine to move objects or moving on an incline may cause injury or
damage. The machine must only be used to sand dry wooden floors which are level or
have a maximum incline of 2%. Do not use the machine to sand furniture. Do not sit
astride the machine when it is operating.
Work surfaces may be seriously damaged if the machine is left turning on one point
while the tool is in contact with the surface. To avoid damaging the surface approach
the cutting line carefully. Do not stop when lowering and raising the equipment, keep
moving at constant speed.
To start the machine proceed as follows:
1. Become familiar with the
machine and read all
instructions and safety
2. Arrange the dust bag as indicated by the yellow arrow and secure it with
3. Locate the power supply. The socket must be compatible with the plug. To avoid electrical hazards the socket
must be earth protected with a 20 A fuse.
4. Wind the cable round the cable safety arm (as
shown in the photo at the side) to keep it away
from the path of the machine.
To Next Page