Need help?Do you have a question about the Kuppersbusch EKDG 6800.1 and is the answer not in the manual?
General| Type | Built-in oven |
|---|---|
| Oven type | Multifunction |
| Energy efficiency class | A+ |
| Number of cooking functions | 13 |
| Dimensions (H x W x D) | 595 x 595 x 550 mm |
| Width | 595 mm |
| Height | 595 mm |
| Power consumption | 3.5 kW |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Installation type | Built-in |
| Color | Stainless steel |
| Depth | 550 mm |
| Control type | Touch |
| Number of cooking zones | 0 |
Overview of the EDG 6600.1 model, including components and technical data.
Overview of the EDG 6600.0 model, including components and technical data.
Overview of the EEBD 6600.0 model, including components and accessories.
Overview of the EKDG 6800.0 model, including components and technical data.
Overview of EKDG 6800.1/6800.2 models, including components.
Essential safety guidelines for qualified technicians during appliance installation.
Specific installation instructions for EDG and EKDG models into niches.
Installation guidelines for the EEBD 6600.0 model in various niche types.
Explains the limestone sensor's role in detecting scaling and its impact.
Details the level sensor's water detection and scaling issues.
Description of the water tank, ignition solenoid, and water system parts.
How the appliance automatically adjusts for altitude for optimal steaming.
Details the 140W floor heater and its protection against overheating.
Describes the water tank microswitch and its electrical connections.
Explains the cross-current fan responsible for cooling air and its wiring.
Details the revolution counter for the cooling air fan.
Instructions on how to remove the appliance's air system components.
Detailed guide to the steaming mode, applications, and program sequence.
Explains the regenerating mode for reheating food and gentle defrosting.
Guide to the professional baking mode, suitable for yeast dough products.
Details the hot air mode for even baking at multiple levels.
Explains the combined mode for tender, juicy meat via steam.
Description of the grill function and its operational sequence.
Details the Pizza Plus mode and its specific operational sequence.
Explains the slow cooking mode and its associated sequence diagram.
Details the top/bottom heat function and its operational sequence.
Glossary of terms and symbols used in the operational modes section.
Instructions for activating and deactivating demonstration mode on specific models.
Procedures for demonstration mode on EKDG 6800.0 and 6800.0-75.
Procedures for demonstration mode on EKDG 6800.1 and 6800.2.
Instructions for activating and deactivating demonstration mode on EEBD 6600.0.
Lists reference messages and guides users on required actions.
Details U-fault messages related to power supply issues and their causes.
Lists H-fault messages specific to EEBD and EDG models and their causes.
Comprehensive fault schedule for EDG 6600.0/6600.1, including signals and causes.
Fault schedule for EKDG 6800.0, covering signals and potential causes.
Fault schedule for EKDG 6800.1, detailing signals and possible causes.
Fault schedule for EKDG 6800.2, listing signals and potential causes.
Fault schedule for EKDG 6800.0-75, covering signals and causes.
Fault schedule for EEBD 6600.0, detailing signals and possible causes.
Discusses the PT 500 sensor, resistance readings, and common faults.
Details the food temperature sensor, its resistance characteristics, and faults.
Covers the water temperature sensor, its specifications, and potential faults.
Explains how steam leaks are identified and indicated as faults.
Addresses faults related to heating spiral and steam temperature sensors.
Information on boiler heater operation and potential faults.
Discusses monitoring, scaling, and faults related to the water level pin.
Details potential faults during the appliance emptying process.
Explains how scaling of the boiler and level pin is detected.
Addresses leaks from the water tank's non-return valve for EEBD 6600.0.
Describes water leaks from the tank connection to the solenoid valve.
Instructions for the descaling program for EDG and EKDG models.
Details the descaling program for EEBD 6600.0, including water hardness settings.
Visual flowchart illustrating the descaling process for EEBD 6600.0.
To Next Page
