Getting Started!
First Time Use
Change the theme
We recommend fully charging your device before use. A full charge takes about 3 hours. To charge your
KURIO Watch, connect it to a USB port with the Micro USB cable included with the product. How long the
battery lasts depends on the device usage. More frequent usage drains the battery more quickly.
Additionally, some activities require more battery consumption, such as games, videos, Bluetooth®
communication, etc.
When you launch your KURIO Watch for the first time, you will follow a quick setup guide and enter your
Child's information. Parental Supervision is ALWAYS recommended for first time use. During setup,
parents can enter their Child's personal information (blood type, medical conditions, emergency
contacts and more). In case of an emergency, this information will be easily accessible! You can edit the
personal information at any time under Settings.
To choose your preferred theme, press and hold anywhere on the
screen for 2 seconds to enter the Customization Mode. Swipe Left or
Right to select different themes. Then press the screen when you've
found a theme you'd like to choose.
Change the Watch face
You can choose between digital and analog watch faces. To choose one
face, press and hold anywhere on the screen for 2 seconds to enter the
Customization Mode. Swipe Left or Right to select different watch faces.
Press the screen when you've found a watch face you'd like to select.
Navigation
Swipe Left and Right to navigate the main menu. Press an icon to select it. Swipe down to display the Option
bar. In the Option bar, you can activate or deactivate the flashlight, open the Camera app, use Bluetooth®,
see your emergency information, and adjust the volume. Swipe up or press anywhere on the main screen to
remove the Option bar from displaying. The Option bar is accessible from all screens.
BATTERY TIME FOR REFERENCE
Standby
Normal Use
Heavy Use
10 days
1 day
2 hours
WARNING : On many apps & games, swipe right (from left edge) to go back to previous screen.
WARNING
Please remove the screen protective film before turning
on your KURIO Watch.
If you unfortunately find that the screen freezes during
initial setup, and that the device cannot be turned off by
pressing the power button, please press the Reset button.
To do so - please note that the Reset button is located on
the left-hand side of the KURIO Watch, under the USB
rubber cover. Once you have lifted the USB rubber cover,
you will see a small hole. Insert a paper clip to in the hole,
and press once to Reset. This will automatically restart
the KURIO Watch.
To Next Page
Loading...
