Kurt KH-60 - Specifications

3
SPECIFICATIONS
Physical size:
 KH-60 Dimensions – 25.4” Deep (17.8” base only) x 13.6” Wide x 22.4” High
 KH-60 Weight – Approximately 170 lbs.
 KH-60-P Dimensions – 20.4” Deep x 11.2” Wide x 19.9” High
 KH-60-P Weight – Approximately 110 lbs.
Maximum Cylinder Force:
 60 Ton
Pump:
 Maximum psi – 10,000
 Reservoir capacity – .6 Gallon
 Oil type – ISO grade 46 anti-wear hydraulic fluid
Electrical Requirements:
 110 Volt AC Single Phase, 60Hz
 15 Amp circuit
Lubrication:
 Moly Grade Anti-Seize 3 oz. Tube
Dies:
 Small KHC or NP60 Series
Maximum Hose Diameter:
 1-1/4” 6 Wire