PAGE
2
HELPFUL HINTS FOR USAGE AND INSTALLATION
• Secure the Tombstone Bag to the sissy bar using the attached Hook-and-Loop
straps as shown in PIC 1.
• FIG 1 Shows how to properly mount the side bags on the Tombstone.
• The inner frame of the Tombstone Bag can be removed to provide helmet
storage. Simply unzip the end of the bag opposite the Backrest Pad, reach inside
and remove the frame.
• The Tombstone Bag includes 1/2”, 2”, and 3” backrest pads. The pads zip to the
front of the bag and can be quickly and easily changed. Experiment with each
option to find the one most comfortable. FIG 2
• Inside pockets are secured with Hook-and-Loop and can be removed if
additional cargo space is needed. The inside pockets also serve as a hidden pocket.
Since the Hook-and-Loop surrounds the perimeter of the pocket, you can pull apart one
edge of the Hook-and-Loop, tuck your valuables inside and press the Hook-and-Loop
back together. PIC 2.
• The inner frame of the Tombstone Bag can be removed to provide helmet storage.
Simply unzip the end of the bag opposite the Backrest Pad, reach inside and remove
the frame
KÜRYAKYN IS NOT RESPONSIBLE FOR IMPROPER LOADING
OR UNSAFE POSITIONING OF THE TOMBSTONE BAG. BE
SURE THE WEIGHT OF THE BAG AND ITS CONTENTS ARE
WITHIN SAFE LIMITS. IT IS THE RIDER’S RESPONSIBILITY
TO ENSURE THE BAG IS LOADED, POSITIONED, AND
SECURED IN A SAFE MANNER THAT WILL NOT ADVERSELY
AFFECT OPERATION OR HANDLING OF THE MOTORCYCLE.
OVERLOADING OR IMPROPERLY SECURING THE TOMBSTONE
BAG MAY CAUSE LOSS OF CONTROL RESULTING IN SERIOUS
INJURY OR DEATH.
Secure all straps away from visible painted
surfaces, moving parts, pinch points or extreme
heat.
Ride On!
TOMBSTONE BAG INSTALLATION
PIC 1
PIC 2
FIG 2
FIG 1
1/2”, 2”, 3” BACKREST PAD
MAIN BAG
SISSY BAR PAD
To Previous Page
Loading...
