Kurzweil Artis 7 - Rear Panel Connections; AC Power Jack; USB Ports; MIDI Ports

The Rear Panel
The AC Power Jack
GS-4
GETTING STARTED GUIDE
The Rear Panel
The Artis & Artis7 rear panel connections.
The AC Power Jack
Please refer to “Setting up the Artis” on page GS-2.
The USB Ports
Use the USB ports to connect the Artis to a computer/tablet in order to do the following:
• Use the Artis as a MIDI controller to play software instruments on a computer.
• Use a computer program to sequence multitrack songs on the Artis.
• Use a computer/tablet to manage the user data contents of the Artis.
• Update the software and sounds of the Artis.
• Store custom Programs and Multis on a USB ash drive.
Be sure to check the Kurzweil Music Systems website at www.kurzweil.com for new
documentation and software updates before using your new instrument.
The MIDI (IN and OUT) Ports
Use the MIDI ports to communicate with other MIDI modules and controllers. The OUT
port is the MIDI transmitting port, and the IN port is the MIDI receiving port.